I use SMC EtherEZ (8416) card on i486, Woody, kernel 2.4.18. ISA, pnp is disabled and the driver (smc-ultra) loads fine. The problem is, while I got several DHCPOFFERs, I never get an IP address. Here're a few lines from my daemon.log while dhclient is running:
Aug 16 12:40:21 teknoc dhclient-2.2.x: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Aug 16 12:40:29 teknoc dhclient-2.2.x: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Aug 16 12:40:43 teknoc dhclient-2.2.x: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 Aug 16 12:40:44 teknoc dhclient-2.2.x: DHCPOFFER from 10.11.1.254 Aug 16 12:41:37 teknoc dhclient-2.2.x: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Aug 16 12:41:37 teknoc dhclient-2.2.x: DHCPOFFER from 213.222.163.254 Aug 16 12:41:40 teknoc dhclient-2.2.x: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Aug 16 12:41:48 teknoc dhclient-2.2.x: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Aug 16 12:42:00 teknoc dhclient-2.2.x: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 Aug 16 12:42:01 teknoc dhclient-2.2.x: DHCPOFFER from 213.222.163.254 Aug 16 12:42:04 teknoc dhclient-2.2.x: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Aug 16 12:42:09 teknoc dhclient-2.2.x: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Aug 16 12:42:18 teknoc dhclient-2.2.x: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 and this goes on until i shut down dhclient. I found this in dmesg, might be related to the problem, but don't really know what to do with it (yes, I'm quite a newbie): NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ds: no socket drivers loaded! VFS: Mounted root (ext2 filesystem) readonly. output of ifconfig eth0: eth0 Link encap:Ethernet HWaddr 00:00:C0:91:0D:D4 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22 errors:0 dropped:0 overruns:0 frame:0 TX packets:68 errors:17 dropped:0 overruns:0 carrier:51 collisions:272 txqueuelen:100 RX bytes:8294 (8.0 KiB) TX bytes:29070 (28.3 KiB) Interrupt:10 Base address:0x250 Memory:c8000-ca000 I attach the whole dmesg output, my .config and modules.conf, hope someone will have an idea. I appreciate any help, thanks: Eszter Komaromi
Linux version 2.4.18 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian prerelease)) #8 Thu Aug 15 13:35:39 CEST 1996 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000001400000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 5120 zone(0): 4096 pages. zone(1): 1024 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=Linux ro root=301 Initializing CPU#0 Console: mono *MDA 80x25 Calibrating delay loop... 33.68 BogoMIPS Memory: 18360k/20480k available (806k kernel code, 1736k reserved, 208k data, 188k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes) Inode-cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) CPU: Before vendor init, caps: 00000001 00000000 00000000, vendor = 2 CPU: After vendor init, caps: 00000001 00000000 00000000 00000000 CPU: After generic, caps: 00000001 00000000 00000000 00000000 CPU: Common caps: 00000001 00000000 00000000 00000000 CPU: AMD Am5x86-WB stepping 04 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfbc80, last bus=0 PCI: Using configuration type 1 PCI: Probing PCI hardware Disabling direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A block: 64 slots per queue, batch=16 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: WDC AC31000F, ATA DISK drive hdb: ASUS CD-S360, ATAPI CD/DVD-ROM drive hdc: WDC AC280S, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 2116800 sectors (1084 MB) w/64KiB Cache, CHS=525/64/63 hdc: 166600 sectors (85 MB) w/7KiB Cache, CHS=980/10/17 Partition check: hda: hda1 hda2 hdc: hdc1 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ds: no socket drivers loaded! VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 188k freed Adding Swap: 58460k swap-space (priority -1) parport0: PC-style at 0x378 [PCSPP(,...)] lp0: using parport0 (polling). lp0: console ready Real Time Clock Driver v1.10e smc-ultra.c:v2.02 2/3/98 Donald Becker ([EMAIL PROTECTED]) eth0: SMC EtherEZ at 0x240, 00 00 C0 91 0D D4,assigned IRQ 10 memory 0xc8000-0xc9fff.
# # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set CONFIG_M486=y # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=4 CONFIG_X86_USE_STRING_486=y CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_PPRO_FENCE=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set # CONFIG_MTRR is not set # CONFIG_SMP is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_UP_IOAPIC is not set # # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # CONFIG_PCMCIA=y CONFIG_CARDBUS=y # CONFIG_I82092 is not set # CONFIG_I82365 is not set # CONFIG_TCIC is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # CONFIG_HOTPLUG_PCI_COMPAQ is not set # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_PM=y # CONFIG_ACPI is not set # CONFIG_APM is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_PC_PCMCIA is not set # CONFIG_PARPORT_AMIGA is not set # CONFIG_PARPORT_MFC3 is not set # CONFIG_PARPORT_ATARI is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_SUNBPP is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play configuration # CONFIG_PNP=y CONFIG_ISAPNP=y # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_BLK_DEV_LVM is not set # # Networking options # CONFIG_PACKET=m # CONFIG_PACKET_MMAP is not set CONFIG_NETLINK_DEV=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y # CONFIG_IP_MULTIPLE_TABLES is not set # CONFIG_IP_ROUTE_MULTIPATH is not set # CONFIG_IP_ROUTE_TOS is not set CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_ROUTE_LARGE_TABLES is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m # CONFIG_IP_NF_MATCH_LIMIT is not set CONFIG_IP_NF_MATCH_MAC=m # CONFIG_IP_NF_MATCH_MARK is not set CONFIG_IP_NF_MATCH_MULTIPORT=m # CONFIG_IP_NF_MATCH_TOS is not set # CONFIG_IP_NF_MATCH_AH_ESP is not set # CONFIG_IP_NF_MATCH_LENGTH is not set # CONFIG_IP_NF_MATCH_TTL is not set # CONFIG_IP_NF_MATCH_TCPMSS is not set CONFIG_IP_NF_MATCH_STATE=m # CONFIG_IP_NF_MATCH_UNCLEAN is not set # CONFIG_IP_NF_MATCH_OWNER is not set CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_REJECT is not set # CONFIG_IP_NF_TARGET_MIRROR is not set CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_IP_NF_NAT_SNMP_BASIC is not set CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m # CONFIG_IP_NF_MANGLE is not set CONFIG_IP_NF_TARGET_LOG=m # CONFIG_IP_NF_TARGET_ULOG is not set # CONFIG_IP_NF_TARGET_TCPMSS is not set # CONFIG_IP_NF_COMPAT_IPCHAINS is not set # CONFIG_IP_NF_COMPAT_IPFWADM is not set # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set # CONFIG_BLK_DEV_COMMERIAL is not set # CONFIG_BLK_DEV_TIVO is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set CONFIG_BLK_DEV_CMD640=y CONFIG_BLK_DEV_CMD640_ENHANCED=y # CONFIG_BLK_DEV_ISAPNP is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_AEC62XX_TUNING is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_AMD74XX_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_PIIX_TUNING is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_PDC202XX_FORCE is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # CONFIG_BLK_DEV_ATARAID is not set # CONFIG_BLK_DEV_ATARAID_PDC is not set # CONFIG_BLK_DEV_ATARAID_HPT is not set # # SCSI support # # CONFIG_SCSI is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set CONFIG_NET_VENDOR_SMC=y # CONFIG_WD80x3 is not set # CONFIG_ULTRAMCA is not set CONFIG_ULTRA=m # CONFIG_ULTRA32 is not set # CONFIG_SMC9194 is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # PCMCIA network device support # # CONFIG_NET_PCMCIA is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # # CONFIG_INPUT is not set # CONFIG_INPUT_KEYBDEV is not set # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_UNIX98_PTYS is not set CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y # CONFIG_PPDEV is not set # # I2C support # # CONFIG_I2C is not set # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_MOUSE is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # CONFIG_QIC02_TAPE is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_INTEL_RNG is not set # CONFIG_NVRAM is not set CONFIG_RTC=m # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_PCMCIA_SERIAL_CS is not set # CONFIG_MWAVE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m # CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_JBD_DEBUG is not set CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=m # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set CONFIG_NTFS_FS=m # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set # CONFIG_DEVPTS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y CONFIG_SUNRPC=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set CONFIG_ZISOFS_FS=m CONFIG_ZLIB_FS_INFLATE=m # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Console drivers # CONFIG_VGA_CONSOLE=y # CONFIG_VIDEO_SELECT is not set # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set # # USB support # # CONFIG_USB is not set # CONFIG_USB_UHCI is not set # CONFIG_USB_UHCI_ALT is not set # CONFIG_USB_OHCI is not set # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH is not set # CONFIG_USB_STORAGE is not set # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_DC2XX is not set # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_RIO500 is not set # # Bluetooth support # # CONFIG_BLUEZ is not set # # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set
### This file is automatically generated by update-modules" # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modutils and read # the manpage for update-modules. # ### update-modules: start processing /etc/modutils/0keep # DO NOT MODIFY THIS FILE! # This file is not marked as conffile to make sure if you upgrade modutils # it will be restored in case some modifications have been made. # # The keep command is necessary to prevent insmod and friends from ignoring # the builtin defaults of a path-statement is encountered. Until all other # packages use the new `add path'-statement this keep-statement is essential # to keep your system working keep ### update-modules: end processing /etc/modutils/0keep ### update-modules: start processing /etc/modutils/actions # Special actions that are needed for some modules # The BTTV module does not load the tuner module automatically, # so do that in here post-install bttv insmod tuner post-remove bttv rmmod tuner ### update-modules: end processing /etc/modutils/actions ### update-modules: start processing /etc/modutils/aliases # Aliases to tell insmod/modprobe which modules to use # Uncomment the network protocols you don't want loaded: # alias net-pf-1 off # Unix # alias net-pf-2 off # IPv4 alias net-pf-3 off # Amateur Radio AX.25 alias net-pf-4 off # IPX alias net-pf-5 off # DDP / appletalk alias net-pf-6 off # Amateur Radio NET/ROM alias net-pf-9 off # X.25 # alias net-pf-10 off # IPv6 alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP alias net-pf-19 off # Acorn Econet alias char-major-10-175 agpgart alias char-major-10-200 tun alias char-major-81 bttv alias char-major-108 ppp_generic alias /dev/ppp ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate # Crypto modules (see http://www.kerneli.org/) alias loop-xfer-gen-0 loop_gen alias loop-xfer-3 loop_fish2 alias loop-xfer-gen-10 loop_gen alias cipher-2 des alias cipher-3 fish2 alias cipher-4 blowfish alias cipher-6 idea alias cipher-7 serp6f alias cipher-8 mars6 alias cipher-11 rc62 alias cipher-15 dfc2 alias cipher-16 rijndael alias cipher-17 rc5 ### update-modules: end processing /etc/modutils/aliases ### update-modules: start processing /etc/modutils/paths # This file contains a list of paths that modprobe should scan, # beside the once that are compiled into the modutils tools # themselves. ### update-modules: end processing /etc/modutils/paths ### update-modules: start processing /etc/modutils/ppp alias /dev/ppp ppp_generic alias char-major-108 ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate ### update-modules: end processing /etc/modutils/ppp ### update-modules: start processing /etc/modutils/setserial # # This is what I wanted to do, but logger is in /usr/bin, which isn't loaded # when the module is first loaded into the kernel at boot time! # #post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload" #pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload" # alias /dev/tts serial alias /dev/tts/0 serial alias /dev/tts/1 serial alias /dev/tts/2 serial alias /dev/tts/3 serial post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null ### update-modules: end processing /etc/modutils/setserial ### update-modules: start processing /etc/modutils/arch/i386 alias parport_lowlevel parport_pc alias char-major-10-144 nvram alias binfmt-0064 binfmt_aout alias char-major-10-135 rtc ### update-modules: end processing /etc/modutils/arch/i386 alias eth0 smc-ultra options smc-ultra io=0x240 irq=10