On Wed, Dec 3, 2008 at 11:57, Chris <[EMAIL PROTECTED]> wrote: > On Wed, 3 Dec 2008 11:43:15 -0800 > "Kelly Clowers" <[EMAIL PROTECTED]> wrote: > >> On Wed, Dec 3, 2008 at 10:38, Chris <[EMAIL PROTECTED]> wrote: >> > Greetings folks, >> > >> > What is suggested I used to get either of my Netgear PCMCIA nics to >> > work? >> > >> > 1. MA401 >> > 2. WG511T >> >> What is the output of lspci for each of them? >> >> >> Cheers, >> Kelly Clowers >> >> > > > Thanks Kelly for the reply: > > MA401: > doppleganger:~# lspci > 00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] > (rev 02) > 00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] > 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link > Controller Audio Device (rev 02) > 00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge > [Aladdin IV/V/V+] > 00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller > 00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller > (rev 02) > 00:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 50) > 00:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 50) > 00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) > 00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 > Controller (PHY/Link) > 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) > 00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU] > 00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 > (MacPhyter) Ethernet Controller > 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP > 330M/340M/350M
I do not see the device in this list. Is this card known to be working? It should show up whether or not there is a driver for it. > WG511T: > doppleganger:~# lspci <snip> > 02:00.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 > Multiprotocol MAC/baseband processor (rev 01) For Etch, madwifi is what you want. For Lenny (kernel 2.6.26), you want the built-in ath5k driver (should just work). Cheers, Kelly Clowers -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]