I'm going to amalgamate all of your thoughts into a single email for simplicity - not sure if that's correct protocol or not, so let me know if it would be better if I replied to each email individually. Thanks everyone for all of the help!
@Rob: > do you need the OSS stuff? might it be that something is > grabbing the resource there and hogging it? I have no idea - honestly, I just went with the out-of-the-box debian lenny configuration. > My sound, however, *does* work. The Gnome volume applet sees > it as "HDA Intel (Alsa mixer)" just like yours. Make sure > you're controlling the right device (File | Change Device) According to alsamixer and the xfce volume control applet, I'm controlling the right sound card (they report HDA Intel and HDA Intel Analog Devices AD1984, respectively). @Nigel: > Have you tried other kernels when booting your Lenny, just to check that your > current sound problems are the same when booting other kernels. I installed linux-image-2.6.24-etchnhalf.1-686 to check, and still no sound. Historically, however (as in, before I started having problems a few days ago), I've had sound work on a 2.6.24 kernel before. > Also looking at the ALSA-configuration.txt file for the 1.0.16 alsa driver, > and later versions, the AD1984 codec lists 3 model options, as below. > > AD1984 > basic default configuration > thinkpad Lenovo Thinkpad T61/X61 > dell Dell T3400 > > If you havn't already done so, it may be worth adding the following line > to /etc/modprobe.d/alsa-base. > > options snd-hda-intel model=thinkpad > > Reboot after doing this. You can restart alsa, but a reboot starts from > scratch, so may be the easier option. I didn't have this in my alsa-base file, and I've now added it. Still no sound, though. > You may find that opening alsamixer as user on the CLI (Gnomes terminal, or > KDE's Konsole), may show more controls, which may need to be unmuted (M key > to mute/unmute), or additional sliders that need to be pushed up to get sound > output. Nothing that I can see, unfortunately. Master is at full, headphones reads 00, PCM is at full, speaker reads 00. IEC958 is off, but turning it on doesn't seem to change anything. All the mics are muted. > I am puzzled that your lsmod shows the module, snd-hdsnd-hda-intel. I can't > find that module anywhere, but apparently in your case it is loaded, and 2 > things are using it. Try the commands below, and post the output, to see what > if anything is using the sound, and may be preventing your sounds working. > > lsof -n | grep /dev/dsp > lsof | grep /dev/snd Gah! I must've messed up the copy/paste or something. Thanks so much for your diligence. Here's what it should have read: $ lsmod | grep snd_hda_intel snd_hda_intel 331032 2 snd_pcm 62820 2 snd_pcm_oss,snd_hda_intel snd_page_alloc 7496 2 snd_hda_intel,snd_pcm snd_hwdep 6308 1 snd_hda_intel snd 46724 14 snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_seq,snd_timer,snd_seq_device And here are the other commands (lsof -n | grep /dev/dsp returns nothing): $ lsof | grep /dev/snd xfce-mcs- 3393 kylebarbour 5u CHR 116,0 5678 /dev/snd/controlC0 xfce4-mix 3410 kylebarbour 6u CHR 116,0 5678 /dev/snd/controlC0 firefox-b 3627 kylebarbour mem CHR 116,16 5659 /dev/snd/pcmC0D0p firefox-b 3627 kylebarbour 62r CHR 116,33 5301 /dev/snd/timer firefox-b 3627 kylebarbour 63u CHR 116,16 5659 /dev/snd/pcmC0D0p Kyle -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org