On 11:28 Sun 11 Jan     , Adrian Levi wrote:
> 2009/1/11 Mitchell Laks <ml...@post.harvard.edu>:
> 
> 
> > I would try to explore the idea that the CPU or motherboard is defective. 
> > Perhaps the second core is bad.
> >
> > I had a problem with memory sticks that was similar. One stick worked and 
> > not two. I first found that
> > there was a bad memory stick ( 1 out of 2). then after replacing it, it 
> > happened again and it needed a
> > bios upgrade of the motherboard to work. I used memtest96+ to diagnose my 
> > problems.
> >
> > Perhaps you can find a testing software for the dual  core cpu from your 
> > cpu or motherboard vendor....
> >
> > Mitchell
> 
> UBCD has numerous cpu testing programs on it, perhaps one of those?
> 
> http://www.ultimatebootcd.com/
> 
> Adrian


I have reconsidered the issue.

I would approach your problem in a systematic way. You have some data. 

CPU seems to lock up with dual core set up. You find it with Debian install, 
but not with Windows. Bah I don't believe that. 
Check using live CD: knoppix or finnix or some other ones. After booting try 
some tests.

Make sure to do Mem86+ test for the ram and make sure your ram is good. Very 
often RAM is bad and can be confusing.
you need to systematically test this stuff.

Look at this Great Article:

http://www.ibm.com/developerworks/library/l-hw1/
Linux hardware stability guide, Part 1
CPU and memory troubleshooting
Daniel Robbins (drobb...@gentoo.org), President/CEO, Gentoo Technologies, Inc.

Good luck,

Mitchell







> 
> -- 
> 24x7x365 != 24x7x52 Stupid or bad maths?
> <erno> hm. I've lost a machine.. literally _lost_. it responds to
> ping, it works completely, I just can't figure out where in my
> apartment it is.
> 
> 
> -- 
> To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
> with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
> 


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to