Wayne <linux...@gmail.com> wrote:
green wrote:
Wayne <linux...@gmail.com> wrote at 2009-12-30 10:24 -0600:
Brief history. I am now using a D-Link DWA-556 PciE card. It has
an Atheros AR5008 chip and I am using the mad-wifi ath5k driver
code. I can connect to the Verizon MiFi , using wicd, get a ip
address for the
ath0 interface, and stay connected but, as mentioned above, I can't
connect to the net.
Running route -n displays only the ath ip address. Without a route
to the gateway I am stuck. Checking windows machines that 'can' connect
I see that they all get a different gateway addresses. I can't add them
to the routing table because route won't allow any of them. Google
has not found any posts/information about using the MiFi with Linux
except
the ones I have posted here.
Try this:
1. Find out IP of ath0 connection using 'ifconfig ath0' (ex.
192.168.0.25)
The MiFi is supposed to assign IP addresses in the range if 192.168.1.2
to .10. It does when I had the Netgear WG111v2 Connected ( the one time
I got it working). Using the DWA-556 on testing it assigns an IP of
169.254.213.81 every time I get it connected. Verizon support says they
don't understand why/how that is happening. I spoke with a MiFi expert
who then spent 10 minutes conferring with other (tier 2) experts. It was
their opinion that the MiFi hub should work with linux but they have not
had any reports that it, in fact, does
2. Try pinging the first IP on that network (ping 192.168.0.1)
I and only ping the above 169. addr.
3. If that works, set the default route to that IP
route add default gw 192.168.0.1
Since the only route in the routing table is 169.254.0.0, I can't add
the 192 addr. I have tried though.
4. Then try 'ping google.com'
Oh I so wish I could.
As I have never had a problem connecting to an open AP, I even tried
opening up the MiFi. Windows connected and could go to the net but when
I tried the same on linux, I again recieved the 169 IP address which
resulted in no joy, again. A grep of my whole system could not find any
169 addresses. I am about out of Ideas except for the ndiswrapper
option. I have just downloaded two 64 bit windows XP drivers and will
have to give them a try, if I can't find any other thing to try.
Maybe I should try getting on without any Network Managers(?). I never
used them before but went that route because 'everyone else is using
them'. :-(
Thanks for the reply. If you have any other suggestions, I am very open
to try them.
TIA
Wayne
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org