Camaleón ha scritto:
On Fri, 22 Jan 2010 14:09:48 +0100, Marco Vaschetto wrote:
Camaleón ha scritto:
On Fri, 22 Jan 2010 13:11:18 +0100, Marco Vaschetto wrote:
iface eth0 inet static
Shouldn't that read "iface eth0:1 inet static"? :-?
^^^^^^
I have try whit static configuration for eth0 and the alias, like:
(...)
And I try to configure (*eth0*)* *whit the local Ethernet ip address and
the alias (*eth0:1*) whit the public ip but I got always the same error,
so if the configuration of "/etc/network/interfaces" is right I'm
thinking, is possible, I didn't enable in the kernel some modules;
but if the unload modules, I didn't know witch one I must load for make
the alias working.
No additional module should be needed to load for using virtual
interfaces. It must be a very an error in the config file we are
both failing to see :-)
Just try with a simpler file, something like this:
5.4.3. The virtual interface
http://www.debian.org/doc/manuals/debian-reference/ch05.en.html#_the_virtual_interface
And see what happens.
Greetings,
yes, is about metric the problem, and I think must configure the virtual
interface like is a normal hardware..
now I have configure like this
#eth0 public ip
allow-hotplug
auto eth0
iface eth0 inet static
address 195.137.146.82
netmask 255.255.255.248
network 195.137.146.80
broadcast 195.137.146.87
gateway 195.137.146.81
metric 0
#eth0:1 local ethernet
allow-hotplug
auto eth0:1
iface eth0:1 inet static
address 192.168.0.50
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.254
dns-nameserver 192.168.0.1
metric 1
and is work fine.
Tank's for your help.
Marco
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org