Le 25/05/10 18:44, Jordan Metzmeier a écrit :
I run Debian Lenny on a DFI Lanparty DK p45-t2rs. I really like the
board but it did throw a curveball at me. Since it had an Intel ICH10R
southbridge, I expected it to have an Intel ICH storage controller and
use the ata_piix driver. This was not the case, instead, it used a
Jmicron storage controller (using the ahci driver) which forced me
into using the kmuto installer and the lenny-backports kernel.
Hello,
I might be wrong, but I guess the exact name for your motherboard is DFI
Lanparty DK p45-t2rs PLUS (as opposed to the Elite or Turbo models),
which has 8 SATAII ports, and I also guess you have used the two yellow
ports? If so, plug your drives in the orange ports to use the Sata
controller from the ICH10R and not the JMicron JMB363 (given the vast
amount of options traditionnally present in a DFI LanParty BIOS, you can
probably disable the JMicron controller if you want to do so).
The ICH10R only provides 6 SATAII ports, and the JMicron controller is
there to provide 2 additionnal ports.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4bfc02d3.8030...@gmail.com