Hi there, I am trying to mount an IDE disk from an old (broken) machine. I am using a USB adaptor. After attaching the IDE disk to the USB adaptor, I cannot do anything with the disk.
dmesg reveal: [13927.196346] usb-storage: device scan complete [13927.503084] scsi 4:0:0:0: Direct-Access ST320413 A 0000 PQ: 0 ANSI: 0 [13927.504751] sd 4:0:0:0: Attached scsi generic sg2 type 0 [13927.505864] sd 4:0:0:0: [sdb] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB) [13927.506727] sd 4:0:0:0: [sdb] Write Protect is off [13927.506734] sd 4:0:0:0: [sdb] Mode Sense: 27 00 00 00 [13927.506739] sd 4:0:0:0: [sdb] Assuming drive cache: write through [13927.508348] sd 4:0:0:0: [sdb] Assuming drive cache: write through [13927.508355] sdb: sdb1 < sdb5 sdb6 sdb7 > [13927.549046] sd 4:0:0:0: [sdb] Assuming drive cache: write through [13927.549050] sd 4:0:0:0: [sdb] Attached SCSI disk [13930.050201] sr 0:0:0:0: [sr0] Unhandled sense code [13930.050209] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [13930.050218] sr 0:0:0:0: [sr0] Sense Key : Hardware Error [current] [13930.050227] sr 0:0:0:0: [sr0] Add. Sense: Timeout on logical unit [13930.050237] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 87 68 00 00 01 00 [13930.050256] end_request: I/O error, dev sr0, sector 400800 [13930.050267] Buffer I/O error on device sr0, logical block 100200 When trying to mount, I get: $ sudo mount -t auto /dev/sdb7 /tmp/test mount: unknown filesystem type 'LVM2_member' But it looks like I do have a LVM2 filesystem on this disk: $ sudo pvs PV VG Fmt Attr PSize PFree /dev/sda2 dhcp-67-183 lvm2 a- 148.81G 0 /dev/sdb7 Debian lvm2 a- 17.89G 0 Same issue with : $ sudo lvdisplay /dev/sdb7 Volume group "sdb7" not found Any suggestion greatly appreciated ! Thanks, -- Mathieu -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktimjikbiujx+x9jaa2krh2-dqtfqwog0kzkgz...@mail.gmail.com