I'm using a custom built kernel that I've created with make-kpkg using the debian kernel source, and I've also created and installed kernel-source and kernel-headers with that same utility.
I need to rebuild the alsa modules to include the module called "aloop," which isn't included in the stock kernel, and I can't find it in my custom kernel either. I've tried using the m-a utility, but it keeps saying it cannot find my kernel's headers. I've used "m-a prepare" which created the symlink, but it still cannot find the headers. The symlink is fine, it links to my kernel headers in /usr/src. I figured this won't really work anyways as aloop was not one of the modules listed in the m-a utility for alsa anyways, but I'd still like to know why m-a can't find my headers. I've also tried grabbing the alsa-driver-1.0.23.tar.bz2 from the alsa project, and build and installed it according to http://alsa.opensrc.org/index.php/Jack_and_Loopback_device_as_Alsa-to-Jack_bridge . The only thing I did differently is that i used --with-cards=all: ./configure --with-cards=all --with-oss=yes --with-sequencer=yes However, when I tried to "sudo modprobe snd-aloop", it said something about unknown symbol in aloop.ko(?) (i had since rebooted and had to purge and reinstall the kernel because the kernel wouldn't even load). I need to get that aloop module built and loaded to try and create the Alsa to Jack bridge. Any suggestions? Much appreciated in advance! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti=jmlyz2i5b56f4gsexcdo+05fxztzhxagmd...@mail.gmail.com
