--- On Sat, 9/18/10, Camaleón <noela...@gmail.com> wrote: > Before you throw out your adapater :-), just be sure you > cannot even > communicate with minicom.
I recalled that there was a way to send a command to the modem without minicom, so I tried: # echo ATDTtest-phone-number-here > /dev/ttyUSB0 The modem does successfully dial the test number when connected through the USB adapter. The ATH command (hangup) also appears to be working: # echo ATH > /dev/ttyUSB0 Strange, not sure why it doesn't dial out as a part of my pppd setup that works with RS-232: ## cat /etc/chatscripts/provider # This is the chat script used to dial out to your default service provider. # Please customize the entries enclosed in parenthesis to match your setup. # Only the "provider" file will be handled by poff and pon (unless with # extra command line arguments). # # Remember to edit /etc/ppp/peers/provider accordingly. # # ATZW2 as a default init string # - On all hayes compatible modems, W2 will correctly report the connect # speed. # ABORT BUSY ABORT "NO CARRIER" ABORT VOICE ABORT "NO DIALTONE" "" ATZW2 OK ATDT12345678900 ogin idhere word passwordhere "" ppp ## cat /etc/ppp/peers/provider # These are the options to dial out to your default service provider. # Please customize them correctly. Only the "provider" file will be # handled by poff and pon (unless with extra command line arguments). # You usually need this if there is no PAP authentication noauth # The chat script (be sure to edit that file, too!) connect "/usr/sbin/chat -v -f /etc/chatscripts/provider" # Set up routing to go through this PPP link defaultroute # Default modem (you better replace this with /dev/ttySx!) /dev/ttyUSB0 # Speed 115200 # Keep modem up even if connection fails # persist -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/316004.59543...@web45812.mail.sp1.yahoo.com
