Squeeze KDE 4.4.5 Hello,
I need to import my data from my former IDE-hd and thought it might be easily done with an usb-bridge. But mounting does not work. This is my old disk: Device Boot Start End Blocks Id System /dev/sdb1 * 1 38298 307628653+ 83 Linux /dev/sdb2 38299 38913 4939987+ 5 Extended /dev/sdb5 38299 38913 4939956 82 Linux swap / Solaris Data are on sdb2 How to mount sdb2 properly? Thanks for helping. Regards Bernd dmesg says: [ 671.140012] usb 1-5: new high speed USB device using ehci_hcd and address 5 [ 671.273721] usb 1-5: New USB device found, idVendor=152d, idProduct=2338 [ 671.273725] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 671.273728] usb 1-5: Product: USB to ATA/ATAPI Bridge [ 671.273730] usb 1-5: Manufacturer: JMicron [ 671.273731] usb 1-5: SerialNumber: 152D203380B6 [ 671.273822] usb 1-5: configuration #1 chosen from 1 choice [ 671.332580] Initializing USB Mass Storage driver... [ 671.332667] scsi5 : SCSI emulation for USB Mass Storage devices [ 671.332783] usbcore: registered new interface driver usb-storage [ 671.332786] USB Mass Storage support registered. [ 671.351825] usb-storage: device found at 5 [ 671.351827] usb-storage: waiting for device to settle before scanning [ 676.348644] usb-storage: device scan complete [ 676.349378] scsi 5:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS [ 676.350003] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 676.352182] sd 5:0:0:0: [sdb] Attached SCSI disk [ 689.004913] usb 1-5: USB disconnect, address 5 [ 698.356517] usb 1-5: new high speed USB device using ehci_hcd and address 6 [ 698.493770] usb 1-5: New USB device found, idVendor=152d, idProduct=2338 [ 698.493773] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 698.493776] usb 1-5: Product: USB to ATA/ATAPI Bridge [ 698.493778] usb 1-5: Manufacturer: JMicron [ 698.493779] usb 1-5: SerialNumber: 222291FACA00 [ 698.493873] usb 1-5: configuration #1 chosen from 1 choice [ 698.497342] scsi6 : SCSI emulation for USB Mass Storage devices [ 698.497558] usb-storage: device found at 6 [ 698.497560] usb-storage: waiting for device to settle before scanning [ 703.500197] usb-storage: device scan complete [ 703.500946] scsi 6:0:0:0: Direct-Access ST332082 0ACE D PQ: 0 ANSI: 2 CCS [ 703.501829] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 703.502560] sd 6:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 703.505851] sd 6:0:0:0: [sdb] Write Protect is off [ 703.505855] sd 6:0:0:0: [sdb] Mode Sense: 00 38 00 00 [ 703.505857] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 703.507763] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 703.507768] sdb: sdb1 sdb2 < sdb5 > [ 703.594669] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 703.594673] sd 6:0:0:0: [sdb] Attached SCSI disk [ 727.824071] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 488 [ 847.824070] ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 339 [ 967.824570] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 671 [ 1011.645301] attempt to access beyond end of device [ 1011.645305] sdb2: rw=0, want=4, limit=2 [ 1011.645307] EXT3-fs: unable to read superblock Thanks Bernd -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201011060022.14337.b_kl...@web.de
