On Tue, 2003-09-16 at 15:14, Joan Tur wrote: [...] > When I plug an USB to RS232 converter I get the following output from dmesg: > - ----- > hub.c: new USB device 00:1d.1-1, assigned address 2 > usb.c: USB device 2 (vend/prod 0x403/0x6001) is not claimed by any active > driver. > - ----- > > I've got hotplug installed... shouldn't it load automatically the required > modules (none is loaded)? 8-?
not if it doesn't recognize the device. IIRC usb devices are cataloged in /etc/usbmgr/vendor/<vendor_id>/<prod_id>/module if you don't have a path /etc/usbmgr/vendor/0403/6001/ then your device is likely not supported. If it is supported, and you find out which module supports it, do mkdir -p /etc/usbmgr/vendor/0403/6001/ and then echo <modulename> > /etc/usbmgr/vendor/0403/6001/module -Mark -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
