Andrei, > Is WD40 suitable for such fans?
The bearing is covered by a plastic cap or a sticker or both. Very little of any sprayed lubricant will reach the bearing. Very similar to spraying a jet of oil at the wheel of a car to "fix" a bad wheel bearing. Also, the spray will coat parts which don't need it. That will collect more dust and help polymers deteriorate. If you really want to fix it, the fan must be dismantled. Not difficult; just requires patient & careful effort. Once it is apart the repair must be appropriate to the problem. As mentioned a few days back, a ball bearing will need cleaning and oiling or replacement, depending on condition. A sintered bushing will need to have wear particles cleaned out. Fresh oil in a dirty bushing won't help for long. More here. http://en.wikipedia.org/wiki/Plain_bearing http://en.wikipedia.org/wiki/Sintering http://en.wikipedia.org/wiki/Ball_bearing Regards, ... Peter E. -- Telephone 1 360 450 2132. 7785886232 is gone. Shop pages http://carnot.yi.org/ accessible as long as the old drives survive. Personal pages http://members.shaw.ca/peasthope/ . -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/171056709.45287.39...@heaviside.invalid
