Hi all! I'm having an issue with my usb 3.0 port. I've recently bought an Asus N73JF laptop which has one such port. I'm running a fully updated Squeeze with the 2.6.32-5-amd64 kernel image from the Debian repo. During boot I see lots of: "hub 1-1:1.0: unable to enumerate USB device on port 5" and the port doesn't work. When I run "lspci -v" I get the following (among others):
04:00.0 USB Controller: Fresco Logic Device 1400 (rev 01) (prog-if 30) Subsystem: Device 1d5c:1000 Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at d6000000 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [80] Express Endpoint, MSI 00 Kernel driver in use: xhci_hcd So obviously xhci is used for it, as it should I guess. Some google search returned, that it might be an issue with ehci getting in the way so I experimented a bit with modprobe. I disabled ehci_hcd and when I typed "modprobe xhci_hcd" I got the following response: FATAL: Module xhci_hcd not found. It's the same with ehci enabled so I guess this has nothing to do with it. I looked into /sys/bus/pci/drivers/ and xhci_hcd is there all right. Does anyone know what I'm missing? It would be nice to be able to use the usb 3.0 but I can't seem to find any solution. All advice are welcome Regards, KB -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ii4oqe$8vf$1...@speranza.aioe.org