On Fri, Sep 19, 2003 at 06:07:36PM -0700, Jim McCloskey wrote: > Any attempt to load parport_pc (or the combination of parport, lp, and > parport_pc) by hand fails, and gives the usual: > > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters. > > The User Guide for the motherboard says that the parallel port is on > IRQ 7, but trying: > > insmod parport_pc irq=7
What address is the port at? The standard addresses are 0x378, 0x278 and 0x3bc. You can usually configure these in the BIOS. Set the port to use address 0x378 for greatest compatibility. -- Pigeon Be kind to pigeons Get my GPG key here: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x21C61F7F
pgp00000.pgp
Description: PGP signature
