This motherboard used to work under a previous install of Debian, I Updated to Squeeze through a fresh install (hard drive replacement). Ever since I have been unable to get the sound to work.
With the speakers plugged in to the speaker port I get random pops coming from the speakers, Clicking on mute and un-mute reproduces these pops. I am able to control the mic inputs so that i can turn up and down the mic volume on t\both the front and rear inputs and hear the resulting noises. This version of the chipset has a 6 connector audio + spdif + HDMI on the rear + 2 ports on the front. Unsure what to provide at the moment, so here are some of the common outputs to hopefully help. root@gemini:~# alsactl init Unknown hardware: "HDA-Intel" "Realtek ALC892" "HDA:10ec0892,1043841b,00100302" "0x1043" "0x841b" Hardware is initialized using a guess method root@gemini:~# adrian@gemini:~$ cat /proc/asound/cards 0 [SB ]: HDA-Intel - HDA ATI SB HDA ATI SB at 0xfe6f4000 irq 16 1 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xfe8e8000 irq 19 adrian@gemini:~$ adrian@gemini:~$ lspci -vv 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 841b Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: HDA Intel 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40) Subsystem: ASUSTeK Computer Inc. Device 8443 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Hope this helps, I have googled and tried everything i can think of, Adrian 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] Subsystem: ASUSTeK Computer Inc. Device 843e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe8e8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: HDA Intel -- 24x7x365 != 24x7x52 Stupid or bad maths? <erno> hm. I've lost a machine.. literally _lost_. it responds to ping, it works completely, I just can't figure out where in my apartment it is. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTi=ri_aeyezhoccw8p5cakkpot2...@mail.gmail.com