On Mon, May 23, 2011 at 5:08 PM, Dennis Wicks <w...@mgssub.com> wrote:
I'm sorry! That was a very significant typo! I have a P4, not a P2. Also, > not raid disk. > No worries, I'm just surprised no one else picked up on it sooner lol. > > Also, > >> Mem: 1555440k Swap: 6168868k >> > so that's ~1.5GB in ram and 5GB for swap.... > > Disk /dev/hda: 160 GB, 160039272960 bytes >> 255 heads, 63 sectors/track, 19457 cylinders >> Units = cylinders of 16065 * 512 = 8225280 bytes >> >> Device Boot Start End Blocks Id System /dev/hda1 >> * 1 19200 154223968 83 Linux >> /dev/hda2 19201 19286 682762 82 Linux swap >> /dev/hda3 19287 19372 682762 82 Linux swap >> /dev/hda4 19373 19457 674730 82 Linux swap >> >> Disk /dev/hdb: 40 GB, 40978344960 bytes >> 255 heads, 63 sectors/track, 4982 cylinders >> Units = cylinders of 16065 * 512 = 8225280 bytes >> >> Device Boot Start End Blocks Id System /dev/hdb1 >> 1 4726 37961563 83 Linux >> /dev/hdb2 4727 4810 666697 82 Linux swap >> /dev/hdb3 4811 4894 666697 82 Linux swap >> /dev/hdb4 4895 4982 698827 82 Linux swap >> >> Disk /dev/hdc: 250 GB, 250056737280 bytes >> 255 heads, 63 sectors/track, 30401 cylinders >> Units = cylinders of 16065 * 512 = 8225280 bytes >> >> Device Boot Start End Blocks Id System /dev/hdc1 >> 1 30146 242147713 83 Linux >> /dev/hdc2 30147 30230 666697 82 Linux swap >> /dev/hdc3 30231 30314 666697 82 Linux swap >> /dev/hdc4 30315 30401 690795 82 Linux swap >> >> Raiding 3 swaps across 3 disks? Interesting ... never thought of that ... Just to note ... a little more information then above is needed to see if it's a out of memory/swap issue Mem: 510480k total, 432012k used, 78468k free, 143148k buffers Swap: 1249916k total, 33508k used, 1216408k free, 173584k cached usually the first 3 columns (total/used/free) will do, free is the most important, if Mem has 0 free, then everything is getting swapped that is not in ram already. if Swap is really low, then you are having paging issues, the lag could be related to the raided swap and/or a fault disk in the array > > > Yes, I can move the mouse. There is hesitation when I try to switch to > either a terminal session or ctl-alt-fx console to run top. > > Another symptom is that I can type while the system is frozen but nothing > appears on the screen until the system frees up then it all displays at > once. > I've seen that before, several years ago, sadly the solution there was my ex-wife taking an ax to the machine :( So I was never able to properly diagnose why, but it does tell us that the machine is buffering input and not all cycles are being devoted elsewhere, just a significant portion of them. > > I will run the other tests and post the results. > If you swap out the SODIMM's and run Memtest86+, allow at least 12h per SODIMM, 24h to be on the safe side. If you have none to swap out, then just let the machine run 12-24h uninterrupted. > > Thanks for the help! > Dennis no worrries ... > P.S. - What are some Mfg & model of "enterprise" disk drives? http://www.seagate.com/www/en-us/products/enterprise/ http://www.wdc.com/en/products/internal/enterprise/ http://www-03.ibm.com/systems/x/options/storage/hddstorage/sas/browse.html Just a few examples ... the 3rd link is for SAS (Serial Attached SCSI) Storage. Enterprise Storage Drives (typically spoken about as Black Drives) are typically designed to fail more loudly, last longer until fail and are accustomed to be run solo or in raid arrays ... where as the consumer-grade drives are typically Green Drives, they spin down more often to conserve power, they fail less loudly or even silently! They are also considerably cheaper ... so you get what you buy! HTH/Chris