I have two monitors 19' (on my left)  24' (on the right) 

Having configure in my xorg.conf a virtual area (3400,1900)  i've managed to 
find the xrand commands to adjust the dual mode to my like.
I tested the while logged in.

But to automate the procedure i put them in /etc/kde4/kdm/Xsetup :

#! /bin/sh
# Xsetup - run as root before the login dialog appears

#xconsole -geometry 480x130-0-0 -notify -verbose -fn fixed -exitOnFail -file 
/dev/xconsole &

xrandr --output DFP2  --mode 1920x1200 
xrandr --output CRT2  --mode 1360x768
xrandr --output CRT2 --left-of DFP2
xrandr --output CRT2  --pos 0x432 


But after reboot (and whlle i get a hint by the position of the login screen -
elevated in the 19' screen) that perhaps they xrand sequence was executed when 
i log in i get:

$ xrandr 
Screen 0: minimum 320 x 200, current 3280 x 1200, maximum 3400 x 1200
DFP1 disconnected (normal left inverted right x axis y axis)
DFP2 connected 1920x1200+1360+0 (normal left inverted right x axis y axis) 
519mm x 324mm
   1920x1200      60.0*+
   1920x1080      60.0  
   1600x1200      60.0  
   1680x1050      60.0  
   1400x1050      60.0  
   1280x1024      75.0  
   1440x900       75.0     59.9  
   1280x960       60.0  
   1280x800       60.0  
   1152x864       60.0  
   1280x768       60.0  
   1280x720       60.0  
   1024x768       75.0     70.1     60.0  
   800x600        72.2     75.0     60.3     56.2  
   640x480        75.0     72.8     67.0     59.9  
DFP3 disconnected (normal left inverted right x axis y axis)
CRT1 disconnected (normal left inverted right x axis y axis)
CRT2 connected 1280x960+0+0 (normal left inverted right x axis y axis) 410mm x 
230mm
   1366x768       59.8 +
   1280x1024      75.0     60.0  
   1280x960       75.0     60.0* 
   1368x768       75.0     75.0  
   1360x768       59.8  
   1280x768       75.0     60.0  
   1280x720       75.0     60.0  
   1024x768       75.0     70.1     60.0  
   800x600        72.2     75.0     60.3     56.2  
   640x480        75.0     72.8     67.0     59.9  


Thus, i get resolution closed but not exactly what i wanted. and CRT2 left oF 
DFP2 BUT the position are not what i wanted. Is there is an explation why the 
same commands will not work from Xsetup ?

alex.


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/201105260002.20864.apreka...@gmail.com

Reply via email to