On Sun, 30 Oct 2011 11:10:36 +0000 Brian <a...@cityscape.co.uk> wrote:
> On Sun 30 Oct 2011 at 14:07:57 +0530, J. Bakshi wrote: > > > Could any one suggest what is actually missing here ? > > You have shown only a portion of your /e/n/i. Ok, here is the complete one ``````````````````````` # The loopback network interface auto lo iface lo inet loopback # We first have to tell ifupdown that instead of just configuring the interface, # it should first ask guessnet to find out in which network we are mapping eth0 script guessnet-ifupdown map default: unknown map home office office iface home inet static address 10.10.54.111 netmask 255.255.255.128 network 10.10.29.1 broadcast 10.10.29.128 gateway 10.10.54.1 dns-nameservers 8.8.8.8 8.8.4.4 test peer address 10.10.54.1 post-up /usr/local/bin/wishnet start post-up /root/bin/FIREWALL start ### when wired network present, disable WIFI ### pre-up /sbin/ifdown wlan0 pre-up /sbin/iwconfig wlan0 txpower off ################################################# down /sbin/iwconfig wlan0 txpower on post-down /usr/local/bin/wishnet stop iface office inet static address 192.168.1.99 netmask 255.255.0.0 network 192.168.1.0 broadcast 192.168.1.0 gateway 192.168.1.1 # need resolvconf to work dns-* entry dns-nameservers 8.8.8.8 8.8.4.4 metric 1 test peer address 192.168.1.1 mac 00:15:17:62:39:4f pre-up /usr/local/bin/wishnet stop ### when wired network present, disable WIFI ### pre-up /sbin/ifdown wlan0 pre-up /sbin/iwconfig wlan0 txpower off ################################################# post-up /root/bin/FIREWALL start down /sbin/iwconfig wlan0 txpower on mapping wlan0 script guessnet-ifupdown map default: office-wifi map office-wifi open unknown map timeout: 12 # map init-time: 12 # for slow drivers map verbose: true map debug: true iface office-wifi inet dhcp wpa-driver nl80211 wpa-conf /usr/local/etc/my.wpa_supplicant.conf test wireless mac 00:1C:F0:3D:4C:C9 post-up /root/bin/FIREWALL start ````````````````````````````` at /usr/local/etc/my.wpa_supplicant.conf I have ``````````````````````````` ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev ap_scan=1 network={ ssid="rblin" psk=026d1e67ce2899210d81f4af99cdd643d29932cfff6c507bb0d19eb90c14a0c4 key_mgmt=WPA-PSK #"RSN" = WPA(2) proto=RSN #encryption #"CCMP" = AES cipher as part of WPA(2) standard. #"TKIP" = TKIP cipher as part of WPA(1) standard. pairwise=CCMP group=CCMP scan_ssid=1 #scan hidden SSID priority=10 } ````````````````` Please note I have not changed anything at /usr/local/etc/my.wpa_supplicant.conf but only at /e/n/i with these two lines [...] wpa-driver nl80211 wpa-conf /usr/local/etc/my.wpa_supplicant.conf [....] -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20111030171146.1b6f7...@shiva.selfip.org