Hi all, I installed debian on an old Asus EEE 701 notebook that I haven't used in a while. It has an integrated SDHC card reader to expand storage, since it only includes a 4gb SSD. I have a 16gb Kingston SDHC card that I used with this PC for a few years with no problems, using both Windows and Xubuntu. But now with my new installation the card is completely unresponsive, I can't use fdisk, nor dd, nor cat on it. Also system shutdown will halt until I remove the card from the reader.
The card reader works, I've tried it with another 256mb card I have. The card also works, I tested it on another computer and had no issues. When I run any program that attempts to read from the card, the program halts until I kill (-9) it or until I remove the card. This happens both on the installed debian as well as in a Xubuntu live usb boot. (At first I thought since I selected a more "localized" [can't remember the name] kernel, I was missing the drivers for this, but since Xubuntu also doesn't work this seems unlikely.) Here's some info thay may help: dmesg when plugging card: Jul 14 19:50:17 mk-ii kernel: [ 289.340154] sd 2:0:0:0: [sdb] 31514624 512-byte logical blocks: (16.1 GB/15.0 GiB) Jul 14 19:50:17 mk-ii kernel: [ 289.343130] sd 2:0:0:0: [sdb] Assuming drive cache: write through Jul 14 19:50:17 mk-ii kernel: [ 289.351139] sd 2:0:0:0: [sdb] Assuming drive cache: write through Jul 14 19:50:17 mk-ii kernel: [ 289.351154] sdb: sdb1 When unplugging: Jul 14 19:50:26 mk-ii kernel: [ 298.363139] sd 2:0:0:0: [sdb] Device not ready Jul 14 19:50:26 mk-ii kernel: [ 298.363151] sd 2:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 14 19:50:26 mk-ii kernel: [ 298.363163] sd 2:0:0:0: [sdb] Sense Key : Not Ready [current] Jul 14 19:50:26 mk-ii kernel: [ 298.363177] sd 2:0:0:0: [sdb] Add. Sense: Medium not present Jul 14 19:50:26 mk-ii kernel: [ 298.363193] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 01 e0 df f0 00 00 08 00 Jul 14 19:50:26 mk-ii kernel: [ 298.363220] end_request: I/O error, dev sdb, sector 31514608 Jul 14 19:50:26 mk-ii kernel: [ 298.363234] Buffer I/O error on device sdb, logical block 3939326 Jul 14 19:50:26 mk-ii kernel: [ 298.376137] sd 2:0:0:0: [sdb] Device not ready Jul 14 19:50:26 mk-ii kernel: [ 298.376149] sd 2:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 14 19:50:26 mk-ii kernel: [ 298.376160] sd 2:0:0:0: [sdb] Sense Key : Not Ready [current] Jul 14 19:50:26 mk-ii kernel: [ 298.376174] sd 2:0:0:0: [sdb] Add. Sense: Medium not present Jul 14 19:50:26 mk-ii kernel: [ 298.376191] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 01 e0 df f0 00 00 08 00 Jul 14 19:50:26 mk-ii kernel: [ 298.376217] end_request: I/O error, dev sdb, sector 31514608 Jul 14 19:50:26 mk-ii kernel: [ 298.376230] Buffer I/O error on device sdb, logical block 3939326 lspci: 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04) 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) 00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 03:00.0 Ethernet controller: Atheros Communications L2 Fast Ethernet (rev a0) lsusb: Bus 004 Device 002: ID eb1a:2761 eMPIA Technology, Inc. EeePC 701 integrated Webcam Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0951:1606 Kingston Technology Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 04d9:a06b Holtek Semiconductor, Inc. Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Any help is greatly appreciated, hopefully I can use this PC again :P. Thanks! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CA++DQU=Q5JYoAqBw=lgupra9r69n11rbkvx3uw_objrq7jz...@mail.gmail.com