->>In response to your message<<- --received from Albert Dengg-- > > ... > > if you want to use the promise scsi emulation drivers in debian you find > instrutions/drivers here: > http://people.debian.org/~blade/install/ (goto the preload floppy) > > But i never tried it (i gave up using the promise raid controller after > the MB tied (it was an onboard controller), but I would recommend to > stick to the opensource driver. One warning though: it is _not_ included > in the 2.5/2.6 kernel....
Thanks again! I followed the links from above to the Promise web site http://www.promise.com/support/download/download2_eng.asp?productId=88&category=All&os=100 grabbed the "Partial Linux Source Code", compiled it as instructed, loaded the new module and can now see the mirrored RAID array as /dev/sda just like on the Red Hat machine. Thanks so much! The new "scsi" disk is now formatted and mounted under Debian! Paul -- Paul Yeatman (858) 534-9896 [EMAIL PROTECTED] ================================== ==Proudly brought to you by Mutt== ================================== -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
