On Fri, Dec 28, 2012 at 05:02:49PM -0800, Ron wrote: > > Setting linux kernel boot parameter pci=conf1 allows my Intel RAID > Controller-RMS25PB080 (LSI 2208/Fusion based) to be detected, and the FW to > transition to Ready state. Without this setting the Card FW responds only > with 0xF0000000 Fault (Masked). > > I found linux kernel series 3.0.0, properly discovered and used the RAID > card. Things broke in kernel series 3.2.0, onward. So this means in my Intel > s2600 system, using the Intel/LSI card I have confirmed broken PCI discovery > in kernels 3.2 up to current day 3.7.1 kernels. > > Details: > Card PCI ID: 1000:005b > Card PCI description: LSI Logic / Symbios Logic MegaRAID SAS 2208 > [Thunderbolt] (rev 03) aka Fusion > Card Firmware Version: v23.9.0-0018 (most current to-date) > Card OEM: Intel RAID Module (Card) RMS25PB080 SAS > System Board: s2600CP - E5-2600 Xeon, LGA2011 Socket > System Firmware BIOS level: 01.06.0002 2012/11/15 (most current to-date)
Is there a question in here somewhere? Otherwise you have sent it to the wrong list. -- "If you're not careful, the newspapers will have you hating the people who are being oppressed, and loving the people who are doing the oppressing." --- Malcolm X -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20121229041632.GA20723@tal