On Fri, Oct 18, 2013 at 3:24 PM, Tom H <tomh0...@gmail.com> wrote: >> ------------------------------------------------------------------->8======= >> auto lo >> iface lo inet loopback >> >> allow-auto eth0.9 >> iface eth0.9 inet static >> address 192.168.1.119 >> netmask 255.255.255.0 >> gateway 192.168.1.1 >> post-up ip address add 192.168.1.199/24 dev eth0.9 >> =======8<------------------------------------------------------------------- >> Is the example above correct? Does it work for you? Could your >> machine be boot so quickly that it might not be visible without >> adding --noclear to /etc/inittab for tty1 getty? > > I tested once. I just took down the network so that only "lo" was > defined and then brought it up with what I'd posted.
I retested after "dpkg -P vlan", booted a couple of times and got no single error. Seems this mean to use VLAN someone should better not install package vlan... :-) Good spot about the non-NETLINK errors!! Thanks so much, I completely missed that! So maybe there is just some issue about some vconfig backward-compatiblity in ifup? Have a great weekend, Tom and all the list! Steffen -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAOBoUnNKOkDh=bnb1jPuwv1XUWwdV_3vUU=FYecNGdnR7PN-=g...@mail.gmail.com