Smart card reader non responsive on Debian Squeeze? The device is recognised on the US bus,
test1:/home/plewis# lsusb -s 005:003 -v Bus 005 Device 003: ID 058f:9540 Alcor Micro Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x058f Alcor Micro Corp. idProduct 0x9540 bcdDevice 1.20 iManufacturer 1 Generic iProduct 2 EMV Smartcard Reader iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 93 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 50mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 11 Chip/SmartCard bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ChipCard Interface Descriptor: bLength 54 bDescriptorType 33 bcdCCID 1.10 (Warning: Only accurate for version 1.0) nMaxSlotIndex 0 bVoltageSupport 7 5.0V 3.0V 1.8V dwProtocols 3 T=0 T=1 dwDefaultClock 3700 dwMaxiumumClock 3700 bNumClockSupported 1 dwDataRate 9946 bps dwMaxDataRate 318280 bps bNumDataRatesSupp. 53 dwMaxIFSD 254 dwSyncProtocols 00000007 2-wire 3-wire I2C dwMechanical 00000000 dwFeatures 000404BE Auto configuration based on ATR Auto activation on insert Auto voltage selection Auto clock change Auto baud rate change Auto PPS made by CCID Auto IFSD exchange Short and extended APDU level exchange dwMaxCCIDMsgLen 272 bClassGetResponse echo bClassEnvelope echo wlcdLayout none bPINSupport 0 bMaxCCIDBusySlots 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) -------------------------------- However pcsc_scan returns test1:/home/plewis# pcsc_scan PC/SC device scanner V 1.4.16 (c) 2001-2009, Ludovic Rousseau <ludovic.rouss...@free.fr> Compiled with PC/SC lite version: 1.5.5 Scanning present readers... Waiting for the first reader... Where it hangs. So, does anyone have this device working on Squeeze and if so, any hints or tips to get mine working here? Thanks in advance. ___________________________________________________________ People of the same trade seldom meet together, even for merriment and diversion, but the conversation ends in a conspiracy against the public -- Adam Smith -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1390137821.3902.1@kingston