On 02/16/2014 01:35 PM, berenger.mo...@neutralite.org wrote:
Le 16.02.2014 20:09, Marc Shapiro a écrit :
I purchased a new monitor and I am having problems with the
resolution. It is a Samsung SyncMaster S24B150 with an optimal
resolution of 1920 x 1080 @ 60 Hz. The highest resolution that I am
offered under System/Preferences/Monitor Settings (in Mate) is
1360x768. That is also the only setting that matches a 16x9 aspect
ratio. I am using the supplied VGA cable. Do I need to use a DVI
cable to get the full resolution? Or is there something else that I
can do? Just today I noticed that the image is not using the full
width of the monitor. The height seems to be correct. I don't think
that it was doing this before, but I don't see any way to adjust it,
either through software, or the monitor's menus. The monitor's menus
give me the option of 'Auto' or 'Wide'. Using 'Auto' gives me a 4x3
aspect ratio and 'Wide' uses most of the screen, but not all. Again,
will getting a DVI cable solve this? Are there drivers that I need to
find and install? Any other clues as to what to look for? All help
appreciated.
Marc
I strongly doubt that it'll help, but maybe your graphical tool lacks
features. Try to run "$xrandr" on command line, and it will give you
what xorg knows.
If you do not find the video mode you want... well, then no other
solution than to write a xorg.conf as said by someone else.
xrandr does not show anything higher than 1360x768. I hope to get a DVI
cable today and we will see if that works. If not then I will create an
xorg.conf file as David suggested. It has been quite a while since I
have had to deal with xorg.conf, but this should be a much simpler file
than I needed to mess with 15 years ago.
Marc
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/53022bf5.6010...@gmail.com