Is this meant for the English mailing list ?? On Thu, Jul 9, 2015 at 10:47 AM, David Guyot < [email protected]> wrote:
> Ah, dammit ! Ça doit être ça. Les caractéristiques de la CM donnent un > GPU intégré avec jusqu'à 2 Gio de mémoire partagée, donc prélevée sur > les 8 Gio. Bizarre, quand même : quand je compte les octets de la RAM > décrits par la carte BIOS-e820, j'obtiens : > * 7455 Mo utilisables ; > * 103 Mo réservés ; > * 65 ko de données ACPI ; > * 7,6 Mo en NVS (?) ACPI. > > Donc ni un total de 8 Gio, ni les chiffres vus par free -m. Ça, je ne me > l'explique pas, mais bon, en tout cas, il faut que je trouve un moyen de > réduire l'empreinte RAM du GPU, puisque je n'ai pas trop besoin de lui > attribuer de la RAM. > > Merci pour la suggestion, Jean-Marc. > > Le jeudi 09 juillet 2015 à 16:27 +0200, Live Informatique a écrit : > > Plutot curieux, peut être de la mémoire partagée avec ton GPU ? > > > > > > Décris ton matos ca sera plus simple ... > > > > > > Cordialement, > > > > Jean-Marc Beuchée > > LIVE INFORMATIQUE > > www.live-informatique.com > > 4 Rue de Coulon > > 35160 MONTFORT/MEU > > 02 99 09 01 67 > > 06 71 54 28 14 > > > > 2015-07-09 15:47 GMT+02:00 David Guyot > > <[email protected]>: > > Cher tous, > > > > J'ai un problème avec ma Jessie amd64 à jour sur une CM Asus > > A88XM-PLUS > > avec un UEFI à jour : j'ai deux barettes de 4 Go installées, > > détectées > > comme telles par l'UEFI, mais la bécane refuse d'en exploiter > > plus de > > 6872 Mo. Je précise qu'un problème matériel est très > > improbable car une > > autre bécane avec la même configuration matérielle et > > logicielle > > présente le même problème. J'ai parcouru l'UEFI dans tous les > > sens pour > > trouver un paramètre lié à la mémoire, mais je ne pouvais y > > changer que > > la fréquence et la tension. Le plus étrange est que certaines > > commandes > > montrent bien les 8 Go matériels, d'autres non : > > $ > free -m > > total used free shared buffers > > cached > > Mem: 6872 2558 4314 53 47 > > 793 > > -/+ buffers/cache: 1716 5155 > > Swap: 14223 0 14223 > > # > dmidecode > > […] > > Handle 0x002F, DMI type 16, 23 bytes > > Physical Memory Array > > Location: System Board Or Motherboard > > Use: System Memory > > Error Correction Type: None > > Maximum Capacity: 64 GB > > Error Information Handle: Not Provided > > Number Of Devices: 4 > > > > Handle 0x0030, DMI type 19, 31 bytes > > Memory Array Mapped Address > > Starting Address: 0x00000000000 > > Ending Address: 0x00FFFFFFFFF > > Range Size: 64 GB > > Physical Array Handle: 0x002F > > Partition Width: 255 > > > > Handle 0x0031, DMI type 17, 34 bytes > > Memory Device > > Array Handle: 0x002F > > Error Information Handle: Not Provided > > Total Width: 64 bits > > Data Width: 64 bits > > Size: 4096 MB > > Form Factor: DIMM > > Set: None > > Locator: DIMM_A1 > > Bank Locator: A1_BANK0 > > Type: DDR3 > > Type Detail: Synchronous Unbuffered (Unregistered) > > Speed: 1600 MHz > > Manufacturer: A1_Manufacturer1 > > Serial Number: A1_SerNum1 > > Asset Tag: A1_AssetTagNum1 > > Part Number: Array1_PartNumber1 > > Rank: Unknown > > Configured Clock Speed: 1600 MHz > > > > Handle 0x0032, DMI type 20, 35 bytes > > Memory Device Mapped Address > > Starting Address: 0x00000000000 > > Ending Address: 0x000FFFFFFFF > > Range Size: 4 GB > > Physical Device Handle: 0x0031 > > Memory Array Mapped Address Handle: 0x0030 > > Partition Row Position: 1 > > > > Handle 0x0033, DMI type 17, 34 bytes > > Memory Device > > Array Handle: 0x002F > > Error Information Handle: Not Provided > > Total Width: Unknown > > Data Width: 64 bits > > Size: No Module Installed > > Form Factor: Unknown > > Set: None > > Locator: DIMM_A2 > > Bank Locator: A1_BANK1 > > Type: Unknown > > Type Detail: None > > Speed: Unknown > > Manufacturer: A1_Manufacturer0 > > Serial Number: A1_SerNum0 > > Asset Tag: A1_AssetTagNum0 > > Part Number: Array1_PartNumber0 > > Rank: Unknown > > Configured Clock Speed: Unknown > > > > Handle 0x0034, DMI type 126, 35 bytes > > Inactive > > > > Handle 0x0035, DMI type 17, 34 bytes > > Memory Device > > Array Handle: 0x002F > > Error Information Handle: Not Provided > > Total Width: 64 bits > > Data Width: 64 bits > > Size: 4096 MB > > Form Factor: DIMM > > Set: None > > Locator: DIMM_B1 > > Bank Locator: A1_BANK2 > > Type: DDR3 > > Type Detail: Synchronous Unbuffered (Unregistered) > > Speed: 1600 MHz > > Manufacturer: Undefined > > Serial Number: 00000000 > > Asset Tag: A1_AssetTagNum2 > > Part Number: F3-2133C9-4GXL > > Rank: 2 > > Configured Clock Speed: 1600 MHz > > > > Handle 0x0036, DMI type 20, 35 bytes > > Memory Device Mapped Address > > Starting Address: 0x00100000000 > > Ending Address: 0x001FFFFFFFF > > Range Size: 4 GB > > Physical Device Handle: 0x0035 > > Memory Array Mapped Address Handle: 0x0030 > > Partition Row Position: 1 > > > > Handle 0x0037, DMI type 17, 34 bytes > > Memory Device > > Array Handle: 0x002F > > Error Information Handle: Not Provided > > Total Width: Unknown > > Data Width: 64 bits > > Size: No Module Installed > > Form Factor: Unknown > > Set: None > > Locator: DIMM_B2 > > Bank Locator: A1_BANK3 > > Type: Unknown > > Type Detail: None > > Speed: Unknown > > Manufacturer: A1_Manufacturer3 > > Serial Number: A1_SerNum3 > > Asset Tag: A1_AssetTagNum3 > > Part Number: Array1_PartNumber3 > > Rank: Unknown > > Configured Clock Speed: Unknown > > […] > > $ > sudo lshw > > […] > > *-memory > > description: Mémoire système > > identifiant matériel: 0 > > taille: 6872MiB > > *-cpu > > produit: AMD A10-7700K Radeon R7, 10 Compute Cores > > 4C+6G > > […] > > $ > dmesg > > [ 0.000000] Initializing cgroup subsys cpuset > > [ 0.000000] Initializing cgroup subsys cpu > > [ 0.000000] Initializing cgroup subsys cpuacct > > [ 0.000000] Linux version 3.16.0-4-amd64 > > ([email protected]) (gcc version 4.8.4 (Debian > > 4.8.4-1) ) > > #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24) > > [ 0.000000] Command line: > > BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 > > root=/dev/mapper/Aethelthryth--vg-root ro quiet > > [ 0.000000] e820: BIOS-provided physical RAM map: > > [ 0.000000] BIOS-e820: [mem > > 0x0000000000000000-0x000000000009e7ff] > > usable > > [ 0.000000] BIOS-e820: [mem > > 0x000000000009e800-0x000000000009ffff] > > reserved > > [ 0.000000] BIOS-e820: [mem > > 0x00000000000e0000-0x00000000000fffff] > > reserved > > [ 0.000000] BIOS-e820: [mem > > 0x0000000000100000-0x000000009d26efff] > > usable > > [ 0.000000] BIOS-e820: [mem > > 0x000000009d26f000-0x000000009d29efff] > > reserved > > [ 0.000000] BIOS-e820: [mem > > 0x000000009d29f000-0x000000009d2aefff] > > ACPI data > > [ 0.000000] BIOS-e820: [mem > > 0x000000009d2af000-0x000000009d7eafff] > > ACPI NVS > > [ 0.000000] BIOS-e820: [mem > > 0x000000009d7eb000-0x000000009e3e5fff] > > reserved > > [ 0.000000] BIOS-e820: [mem > > 0x000000009e3e6000-0x000000009e3e6fff] > > usable > > [ 0.000000] BIOS-e820: [mem > > 0x000000009e3e7000-0x000000009e5ecfff] > > ACPI NVS > > [ 0.000000] BIOS-e820: [mem > > 0x000000009e5ed000-0x000000009ea32fff] > > usable > > [ 0.000000] BIOS-e820: [mem > > 0x000000009ea33000-0x000000009eff3fff] > > reserved > > [ 0.000000] BIOS-e820: [mem > > 0x000000009eff4000-0x000000009effffff] > > usable > > [ 0.000000] BIOS-e820: [mem > > 0x00000000f8000000-0x00000000fbffffff] > > reserved > > [ 0.000000] BIOS-e820: [mem > > 0x00000000feb80000-0x00000000fec01fff] > > reserved > > [ 0.000000] BIOS-e820: [mem > > 0x00000000fec10000-0x00000000fec10fff] > > reserved > > [ 0.000000] BIOS-e820: [mem > > 0x00000000fed00000-0x00000000fed00fff] > > reserved > > [ 0.000000] BIOS-e820: [mem > > 0x00000000fed40000-0x00000000fed44fff] > > reserved > > [ 0.000000] BIOS-e820: [mem > > 0x00000000fed80000-0x00000000fed8ffff] > > reserved > > [ 0.000000] BIOS-e820: [mem > > 0x00000000ff000000-0x00000000ffffffff] > > reserved > > [ 0.000000] BIOS-e820: [mem > > 0x0000000100000000-0x000000021effffff] > > usable > > [ 0.000000] NX (Execute Disable) protection: active > > [ 0.000000] SMBIOS 2.7 present. > > [ 0.000000] DMI: System manufacturer System Product > > Name/A88XM-PLUS, > > BIOS 2302 04/28/2015 > > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable > > ==> > > reserved > > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > > [ 0.000000] AGP: No AGP bridge found > > [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = > > 0x400000000 > > [ 0.000000] MTRR default type: uncachable > > [ 0.000000] MTRR fixed ranges enabled: > > [ 0.000000] 00000-9FFFF write-back > > [ 0.000000] A0000-BFFFF write-through > > [ 0.000000] C0000-CFFFF write-protect > > [ 0.000000] D0000-E7FFF uncachable > > [ 0.000000] E8000-FFFFF write-protect > > [ 0.000000] MTRR variable ranges enabled: > > [ 0.000000] 0 base 000000000000 mask FFFF80000000 > > write-back > > [ 0.000000] 1 base 000080000000 mask FFFFE0000000 > > write-back > > [ 0.000000] 2 disabled > > [ 0.000000] 3 disabled > > [ 0.000000] 4 disabled > > [ 0.000000] 5 disabled > > [ 0.000000] 6 disabled > > [ 0.000000] 7 disabled > > [ 0.000000] TOM2: 000000021f000000 aka 8688M > > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, > > new > > 0x7010600070106 > > [ 0.000000] e820: update [mem 0xa0000000-0xffffffff] usable > > ==> > > reserved > > [ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = > > 0x400000000 > > [ 0.000000] found SMP MP-table at [mem > > 0x000fd710-0x000fd71f] mapped > > at [ffff8800000fd710] > > [ 0.000000] Base memory trampoline at [ffff880000098000] > > 98000 size > > 24576 > > [ 0.000000] Using GB pages for direct mapping > > [ 0.000000] init_memory_mapping: [mem > > 0x00000000-0x000fffff] > > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k > > [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE > > [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE > > [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE > > [ 0.000000] init_memory_mapping: [mem > > 0x21ee00000-0x21effffff] > > [ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M > > [ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE > > [ 0.000000] init_memory_mapping: [mem > > 0x21c000000-0x21edfffff] > > [ 0.000000] [mem 0x21c000000-0x21edfffff] page 2M > > [ 0.000000] init_memory_mapping: [mem > > 0x200000000-0x21bffffff] > > [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M > > [ 0.000000] init_memory_mapping: [mem > > 0x00100000-0x9d26efff] > > [ 0.000000] [mem 0x00100000-0x001fffff] page 4k > > [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M > > [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G > > [ 0.000000] [mem 0x80000000-0x9d1fffff] page 2M > > [ 0.000000] [mem 0x9d200000-0x9d26efff] page 4k > > [ 0.000000] init_memory_mapping: [mem > > 0x9e3e6000-0x9e3e6fff] > > [ 0.000000] [mem 0x9e3e6000-0x9e3e6fff] page 4k > > [ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE > > [ 0.000000] init_memory_mapping: [mem > > 0x9e5ed000-0x9ea32fff] > > [ 0.000000] [mem 0x9e5ed000-0x9e5fffff] page 4k > > [ 0.000000] [mem 0x9e600000-0x9e9fffff] page 2M > > [ 0.000000] [mem 0x9ea00000-0x9ea32fff] page 4k > > [ 0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE > > [ 0.000000] init_memory_mapping: [mem > > 0x9eff4000-0x9effffff] > > [ 0.000000] [mem 0x9eff4000-0x9effffff] page 4k > > [ 0.000000] init_memory_mapping: [mem > > 0x100000000-0x1ffffffff] > > [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G > > [ 0.000000] RAMDISK: [mem 0x35e22000-0x36f08fff] > > [ 0.000000] ACPI: Early table checksum verification > > disabled > > [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 > > ALASKA) > > [ 0.000000] ACPI: XSDT 0x000000009D2A6080 000074 (v01 > > ALASKA A M I > > 01072009 AMI 00010013) > > [ 0.000000] ACPI: FACP 0x000000009D2AD5D8 00010C (v05 > > ALASKA A M I > > 01072009 AMI 00010013) > > [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field > > Pm2ControlBlock has zero address or length: > > 0x0000000000000000/0x1 > > (20140424/tbfadt-649) > > [ 0.000000] ACPI: DSDT 0x000000009D2A6188 00744C (v02 > > ALASKA A M I > > 00000000 INTL 20051117) > > [ 0.000000] ACPI: FACS 0x000000009D7E0080 000040 > > [ 0.000000] ACPI: APIC 0x000000009D2AD6E8 00007E (v03 > > ALASKA A M I > > 01072009 AMI 00010013) > > [ 0.000000] ACPI: FPDT 0x000000009D2AD768 000044 (v01 > > ALASKA A M I > > 01072009 AMI 00010013) > > [ 0.000000] ACPI: MCFG 0x000000009D2AD7B0 00003C (v01 > > ALASKA A M I > > 01072009 MSFT 00010013) > > [ 0.000000] ACPI: BGRT 0x000000009D2AED48 000038 (v00 > > ALASKA A M I > > 01072009 AMI 00010013) > > [ 0.000000] ACPI: HPET 0x000000009D2AD848 000038 (v01 > > ALASKA A M I > > 01072009 AMI 00000005) > > [ 0.000000] ACPI: UEFI 0x000000009D2AD880 000042 (v01 > > ALASKA A M I > > 01072009 00000000) > > [ 0.000000] ACPI: SSDT 0x000000009D2AD8C8 000B9C (v01 AMD > > BANTRY > > 00000001 AMD 00000001) > > [ 0.000000] ACPI: SSDT 0x000000009D2AE468 00033B (v02 AMD > > BANTRY > > 00000002 MSFT 04000000) > > [ 0.000000] ACPI: CRAT 0x000000009D2AE7A8 0005A0 (v01 AMD > > BANTRY > > 00000001 AMD 00000001) > > [ 0.000000] ACPI: Local APIC address 0xfee00000 > > [ 0.000000] No NUMA configuration found > > [ 0.000000] Faking a node at [mem > > 0x0000000000000000-0x000000021effffff] > > [ 0.000000] Initmem setup node 0 [mem > > 0x00000000-0x21effffff] > > [ 0.000000] NODE_DATA [mem 0x21eff7000-0x21effbfff] > > [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> > > [ffff880217600000-ffff88021d9fffff] on node 0 > > [ 0.000000] Zone ranges: > > [ 0.000000] DMA [mem 0x00001000-0x00ffffff] > > [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] > > [ 0.000000] Normal [mem 0x100000000-0x21effffff] > > [ 0.000000] Movable zone start for each node > > [ 0.000000] Early memory node ranges > > [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] > > [ 0.000000] node 0: [mem 0x00100000-0x9d26efff] > > [ 0.000000] node 0: [mem 0x9e3e6000-0x9e3e6fff] > > [ 0.000000] node 0: [mem 0x9e5ed000-0x9ea32fff] > > [ 0.000000] node 0: [mem 0x9eff4000-0x9effffff] > > [ 0.000000] node 0: [mem 0x100000000-0x21effffff] > > [ 0.000000] On node 0 totalpages: 1820255 > > [ 0.000000] DMA zone: 56 pages used for memmap > > [ 0.000000] DMA zone: 21 pages reserved > > [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 > > [ 0.000000] DMA32 zone: 8760 pages used for memmap > > [ 0.000000] DMA32 zone: 640706 pages, LIFO batch:31 > > [ 0.000000] Normal zone: 16072 pages used for memmap > > [ 0.000000] Normal zone: 1175552 pages, LIFO batch:31 > > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > > [ 0.000000] ACPI: Local APIC address 0xfee00000 > > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] > > enabled) > > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] > > enabled) > > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] > > enabled) > > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] > > enabled) > > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge > > lint[0x1]) > > [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] > > gsi_base[0]) > > [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address > > 0xfec00000, GSI > > 0-23 > > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec01000] > > gsi_base[24]) > > [ 0.000000] IOAPIC[1]: apic_id 1, version 33, address > > 0xfec01000, GSI > > 24-55 > > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 > > dfl dfl) > > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 > > low > > level) > > [ 0.000000] ACPI: IRQ0 used by override. > > [ 0.000000] ACPI: IRQ2 used by override. > > [ 0.000000] ACPI: IRQ9 used by override. > > [ 0.000000] Using ACPI (MADT) for SMP configuration > > information > > [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 > > [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs > > [ 0.000000] nr_irqs_gsi: 72 > > [ 0.000000] PM: Registered nosave memory: [mem > > 0x0009e000-0x0009efff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0x0009f000-0x0009ffff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0x000a0000-0x000dffff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0x000e0000-0x000fffff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0x9d26f000-0x9d29efff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0x9d29f000-0x9d2aefff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0x9d2af000-0x9d7eafff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0x9d7eb000-0x9e3e5fff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0x9e3e7000-0x9e5ecfff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0x9ea33000-0x9eff3fff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0x9f000000-0xf7ffffff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xf8000000-0xfbffffff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xfc000000-0xfeb7ffff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xfeb80000-0xfec01fff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xfec02000-0xfec0ffff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xfec10000-0xfec10fff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xfec11000-0xfecfffff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xfed00000-0xfed00fff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xfed01000-0xfed3ffff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xfed40000-0xfed44fff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xfed45000-0xfed7ffff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xfed80000-0xfed8ffff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xfed90000-0xfeffffff] > > [ 0.000000] PM: Registered nosave memory: [mem > > 0xff000000-0xffffffff] > > [ 0.000000] e820: [mem 0x9f000000-0xf7ffffff] available for > > PCI > > devices > > [ 0.000000] Booting paravirtualized kernel on bare hardware > > [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 > > nr_cpu_ids:4 nr_node_ids:1 > > [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021ec00000 > > s80896 > > r8192 d21504 u524288 > > [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 > > alloc=1*2097152 > > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 > > [ 0.000000] Built 1 zonelists in Zone order, mobility > > grouping on. > > Total pages: 1795346 > > [ 0.000000] Policy zone: Normal > > [ 0.000000] Kernel command line: > > BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 > > root=/dev/mapper/Aethelthryth--vg-root ro quiet > > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 > > bytes) > > [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 > > [ 0.000000] AGP: Checking aperture... > > [ 0.000000] AGP: No AGP bridge found > > [ 0.000000] AGP: Node 0: aperture [bus addr > > 0x00000000-0x01ffffff] > > (32MB) > > [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory > > hole > > [ 0.000000] AGP: Please enable the IOMMU option in the BIOS > > setup > > [ 0.000000] AGP: This costs you 64MB of RAM > > [ 0.000000] AGP: Mapping aperture over RAM [mem > > 0x94000000-0x97ffffff] (65536KB) > > [ 0.000000] PM: Registered nosave memory: [mem > > 0x94000000-0x97ffffff] > > [ 0.000000] Memory: 7017680K/7281020K available (5209K > > kernel code, > > 946K rwdata, 1832K rodata, 1204K init, 840K bss, 263340K > > reserved) > > […] > > > > Pour dmesg, j'ai arrêté la sortie à la ligne où il est > > manifeste que le > > système ne détecte pas tout ce qu'il devrait en RAM, donc la > > réponse > > doit être située dans ce qui précède cette ligne, mais je n'en > > sais pas > > encore assez sur ces messages pour les analyser correctement. > > Quelqu'un > > de meilleur que moi verrait-il de quoi il retourne ? > > > > Dans l'attente de vos suggestions, > > > > Cordialement. > > -- > > David Guyot > > > > > > -- > David Guyot > Administrateur système, réseau et télécom / Sysadmin > Europe Camions Interactive / Stockway > Moulin Collot > F-88500 Ambacourt > 03 29 30 47 85 > -- Aron Podrigal - //Be happy :-)
