ukvpn.ufreevpn.com and I have never seen this work before so I am
not sure what a working setup behaves like. It appears that it
takes a sort of grand tour in which it makes 7 or 8 attempts at
connecting but it ultimately gives up.

        One should run the following command to test:

pon ufreevpn debug dump logfd 2 nodetach

pppd options in effect:
debug           # (from command line)
nodetach                # (from command line)
persist         # (from /etc/ppp/peers/ufreevpn)
logfd 2         # (from command line)
dump            # (from command line)
noauth          # (from /etc/ppp/peers/ufreevpn)
remotename ukvpn.ufreevpn.com           # (from /etc/ppp/peers/ufreevpn)
                # (from /etc/ppp/peers/ufreevpn)
pty pptp ukvpn.ufreevpn.com --nolaunchpppd              # (from 
/etc/ppp/peers/ufreevpn)
lcp-echo-failure 4              # (from /etc/ppp/options)
lcp-echo-interval 30            # (from /etc/ppp/options)
hide-password           # (from /etc/ppp/options)
ipparam ukvpn.ufreevpn.com              # (from /etc/ppp/peers/ufreevpn)
defaultroute            # (from /etc/ppp/peers/ufreevpn)
usepeerdns              # (from /etc/ppp/peers/ufreevpn)
nobsdcomp               # (from /etc/ppp/peers/ufreevpn)
nodeflate               # (from /etc/ppp/peers/ufreevpn)
require-mppe-128                # (from /etc/ppp/peers/ufreevpn)
noipx           # (from /etc/ppp/options)
using channel 69
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71258109> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x6ade22e2> 
<pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x1 <auth chap MS-v2>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71258109> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x71258109> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x6ade22e2> <pcomp> <accomp>]
sent [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0x6ade22e2> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0x71258109]
MPPE required, but MS-CHAP[v2] auth not performed.
sent [LCP TermReq id=0x2 "MPPE required but not available"]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x71258109> <pcomp> <accomp>]
rcvd [LCP TermReq id=0x3 "peer refused to authenticate"]
sent [LCP TermAck id=0x3]
rcvd [LCP TermAck id=0x2]
Connection terminated.
using channel 70

        It repeats this routine through 7 more channels. What
does one see when it works?

Thank you.

Martin McCormick


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: 
https://lists.debian.org/20150804012931.RBJX8837.txofep01.suddenlink.net@localhost

Reply via email to