After a hardware change my workstation with X11/XFCE has a new Nvidia graphics card and the nouveau driver doesn't seem to work with new card. Before the hardware change I used xserver-xorg-video-nouveau.
The new Nvidia card is listed by lspci as 02:00.0 VGA compatible controller: NVIDIA Corporation Device 1430 (rev a1) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 1190 Physical Slot: 2 Flags: fast devsel, IRQ 32 Memory at f2000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at f0000000 (64-bit, prefetchable) [size=32M] I/O ports at 1000 [size=128] Expansion ROM at f3080000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Legacy Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [258] L1 PM Substates Capabilities: [128] Power Budgeting <?> Capabilities: [420] Advanced Error Reporting Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900] #19 I haven't found much info on which driver to use with this card. Is the nouveau driver able to work with it? Or do I have to use the Nvidia binary only driver? urs