Paul Morgan a écrit :

On Sat, 29 Nov 2003 22:02:11 +0100, dooble M wrote:



hi everybody, I'm new on this list !

I'm runing with woody and i'm trying to use my ide cd-burner.
Since I read that I need scsi emulation to make it work, I just recompiled my kernel (2.4.22 with make-kpkg) with sg, sr, ide-scsi, and without ide-cd, all as modules.
My burner is hdd, so I added the line: append="hdd=ide-scsi" to my lilo.conf (and ran lilo after).
The kernel is working well, when I run modconf and add the scsi_mod, sr_mod and sg modules, the modules are loaded normaly and i see them with lsmod:


# lsmod
Module Size Used by Not tainted
isofs 18764 0 (autoclean)
snd-pcm-oss 39716 0 (autoclean) (unused)
snd-pcm 60740 0 (autoclean) [snd-pcm-oss]
snd-timer 15268 0 (autoclean) [snd-pcm]
snd-page-alloc 6228 0 (autoclean) [snd-pcm]
snd-mixer-oss 13592 0 (autoclean) [snd-pcm-oss]
autofs4 10324 2 (autoclean)
snd 29476 0 [snd-pcm-oss snd-pcm snd-timer snd-mixer-oss]
soundcore 3876 0 [snd]
nls_iso8859-1 2844 2 (autoclean)
vfat 10828 1 (autoclean)
fat 32728 0 (autoclean) [vfat]
serial 46788 0 (autoclean)
sg 28924 0 (unused)
sr_mod 14328 0 (unused)
scsi_mod 58804 2 [sg sr_mod]
cdrom 29248 0 [sr_mod]
parport_pc 13700 1 (autoclean)
lp 6496 0 (unused)
parport 14688 1 [parport_pc lp]
af_packet 10600 0 (unused)


but when I try to load the module ide-scsi with modconf, I get an installation failed, and a few seconds after, a lot of code with something like that at the end:
Code: Bad EIP Value
Kernel panic: aiee...........


then my system freezes and i'm forced to push the reset button.

I already made a lot of researches over the web, without success.
Help !!
Thanks in advance and sorry for my english.
dooble M



It looks like you're loading modules in the wrong order.


See the CD-Burning HowTo.



Thanks, but it does exactly the same when I load the ide-scsi module first. I'll check again the archives and I'll try to compile another kernel version.
Thanks again.
dooble M



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]


Reply via email to