#### DO not Cc: me, I am on THE LIST and I do not need #### #### messages twice which make it very hard to ansewer ####
Hello Tomas, Am 2018-02-06 hackte to...@tuxteam.de in die Tasten: >> I have installed on my ThinkPad T400 recently Stretch (base, xorg, wdm, >> fvwm, gthumb, blueman, alsa...) only to discover, that 17 Packages have >> missing Dependencies! > > the missing dependencies? I do not know currently, except that blueman depends on glib-x11 which is confirmed by the maintainer. It seems gthumb has the same dependency because sinde blueman is working gthumb too. The dependendies are only satisfait if you install a full DE like Gnome, KDE or other defaults by Debian. If you install the bare minimum like Debian base xorg wdm fvwmg thumb blueman alsa mc you have a non-working system! >> 11 Packages are now working and I try to figure out, WHICH depends are >> missing to write the appropriated Bug Reports. > > what does exactly mean "not working"? Due to dependencies which should > be there but aren't? Due to dependencies which are there, but the needed > packages can't be downloaded? yes, if you know, WHICH package you need, it can be installed manually which is already confirmed by 3 Package maintainers. They assumed, that Debian User install always a complete system, but where not thinking on users which do not need a full DE. Hence, some packages missing dependencies. I will install a second stretch in a VM and install only the minimum and then Package by Package to figure out, which dependencies are missing. It is a huge work, especially when I currently work in my 5,6ha forest on my BioFarm in Estonia (-10°C and 30cm snow). > Is this your problem? Would you like to install (mostly) from a set of > ISOs on an USB stick or similar? My T400 was under Windows 7 and had a "hardware" error which refuse to burn ANY DVDs. So I installed the ISO bootable on the USB Stick and added the second ISO to it. But it does not work. Since my Interanet Server is also not running, I can not even install a local mirror. > Is this your problem? You can set a fixed IP address at install time, > or... This was exactly what was not working! The Installer could not continue. >> Now I have tried to change this to a fixed IP address in >> /etc/network/interfaces, but it showed no reaction, still started DHCP >> even if it is not configured. > > ...is this your problem? What did you do to your /etc/network/interfaces? > What is your init system? auto enp0s25 iface enp0s25 inet static address 192.168.0.202 netmask 255.255.255.0 gateway 192.168.0.1 network 192.168.0.0 SysV > What do you do exactly? "ifup -a"? Or "ifup eth0"? What's the name of your > ethernet interface? The old-fashioned "ethX" or the new-fangled "en0pXXX"? the old fashion does not work anymore. I get an error "Device unknown" ifup enp0s25 > How should we know? Is the broken display important? Yes, because Debian Stretch does not more boot and I can not see the Lilo command prompt > Quoting a very famous (and in a way fundamental) book: don't panic 8-) SEGFAULT! > Thanks for your patience, cheers > - -- tomás Thanks in advance -- Michelle Konzack Miila ITSystems @ TDnet GNU/Linux Developer 00372-54541400