On 2/28/2018 1:37 AM, Thomas George wrote:
On 02/27/2018 01:24 PM, john doe wrote:
On 2/27/2018 7:07 PM, Thomas George wrote:
The Samsung CLP-320 printer's static ip 192.168.1.139 was set about
10 years ago to work on a lan using 192.168.1.x addresses. Last week
the lan's router failed and was replaced with a Netgear r6700 router
using 192.168.2.x addresses. The printer is now inaccessible from the
lan.
Cups Administration says the printer address can be set using its MAC
address:
Configuring the IP Address Using DHCP
The DHCP protocol is the usual way of setting the IP address of a
printer on a managed network. Using the standard dhcpd(8) program
supplied with UNIX you simply need to add a line to the
/etc/dhcpd.conf file:
host/hostname/ {
hardware ethernet/mac-address/;
fixed-address/ip-address/;
}
Make sure that the hostname you use is also listed in the /etc/hosts
file or is registered with your DNS server.
apt-cache search dhcpd finds udhcpd. My pc's system is Debian
Stretch. There is a file /etc/dhcp/dhclient.conf but no file /etc/dhcpd.
Is it possible to access the printer and change its address to one
in 192.168.2.x or to reset it to use dhcp?
The daemon 'dhcpd' is package 'isc-dhcp-server'.
Can't you change the IP of your ISP router to use the subnet 192.168.1.*?
This is certainly the simplest solution but the Netgear Genie does not
have this option even as an advanced setting option. I will contact
Netgear by phone to discuss this possibility.
From a web browser if you try to access 192.168.2.1 or 192.168.2.254 do
you get a web interface?
If resetting the printer is an option I would do that.
Then you simply change the IP address given by the dhcp server in cups.
--
John Doe