On Sat, 3 Mar 2018 23:17:07 +0000 (UTC) Long Wind sent: > i've just installed stretchi've config wireless during > installationand it work during installation but after i boot into > stretch, wireless doesn't worki didn't install network manager during > installation how can i get wireless to work now?Thanks!
After contemplation, my reply is: I have just installed Stretch on a laptop, used the net install image and used the wireless connection instead of the Ethernet. It left me with a very bare bones /etc/network/interfaces which was to be expected, having run into this before: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). Source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback That was all, I had to enter: # The primary network interface # allow-hotplug eth0 iface enp5s0 inet dhcp # The primary network interface # allow-hotplug wlan0 iface wlp6s0 inet dhcp wpa-ssid xxxxx wpa-psk xxxxxxxx I don't allow hotplugging of anything, for various reasons, needing no explanation here. I used the "eth0" and "wlan0" for old times sake. [laughing] Then used; ifup wlp6s0 in a terminal, which is the way I always bring up the internet. Hope that helps, though it might be a bit primitive. Charlie