Hi, Mike Kupfer wrote: > (full files sent off-list)
Received. > Hmm. The bad log has > > [ 7.015708] usbcore: registered new interface driver uas > [ 25.552030] random: crng init done It is quite sparse from that point on: [ 29.034207] usb 1-2: reset high-speed USB device number 2 using xhci_hcd and then inactivity for 220 seconds which ended by unrelated messages. Before the message at 7.015708 the two logs show a short sequence of agreement: "Product", "Manufacturer", "SerialNumber". The USB device is not reported in the bad log as SCSI device sdX. In the good log this is done as "sdb" with partitions "sdb1" and "sdb2". Then the filesystem is detected [ 8.842431] ISO 9660 Extensions: RRIP_1991A A Rock Ridge enhanced ISO with partitions is probably a bootable isohybrid filesystem. So that's what we should expect to see. Both logs have the "error -110" and do not report the stick's serial number. The inactivity before both error messages was 3.5 to 4 seconds. The bad log has two suspicious lines before that range: [ 6.997775] usb 1-2: New USB device found, idVendor=abcd, idProduct=1234 [ 7.000181] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Looks much like phony default values. They are missing in the good log. Other kernel version ? So it could be that the USB stick does not answer to this inquiry within a short timeout threshold. But this seems not to hamper the further handling of the device in the good log. --------------------------------------------------------------------------- > With the live image failures that I'm getting now, the console messages > are > > [ 30.010394] usb 1-1.2: reset high-speed USB device number 3 using ehci-pci This seems to be the worst event better than the stick falling out of the USB socket. > BusyBox v1.22.1 (Debian 1:1.22.0-19+b3) built-in shell (ash) > Enter 'help' for a list of built-in commands. > > (initramfs) Unable to find a medium containing a live file system This matches the bad log. The stick is not registred as SCSI device and thus not accessible for reading or writing data. We shall note that this is not what Kent West, the OP, reports for his problems. If his problem is hardware related, then it is more fuzzy than yours. Have a nice day :) Thomas