I have tried every card (I think) listed and I have not had any luck with virtual pc.
If anybody out there knows what it takes to configure the startx for the virtual pc environment I would be interested. I know that it works, as I had it running with Knoppix at one time. Unfortunately my knoppix disk got a big scratch and I have not downloaded it again.
I have been using dpkg-reconfigure xserver-xfree86 to try to set this up.
<In Response to>
Hi, I hope this is the place for newbie questions... I am trying to install Debian on Virtual PC 5.2 (on a wintel box) The first part of the install works fine, but I am having trouble getting X-Windows to work. I have edited the XF86Config file to use the s3 driver, but I think I have made a mistake somewhere. The output from startx (or at least the last part of the output) is: (II) S3VIRGE: driver (version 1.6.13) for S3 ViRGE chipsets: virge, 86C3 virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2, 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, trio 3d/2x, 86C362, 86C368 (--) Assigning device section with no busID to primary device (EE) No devices detected. Fatal server error: no screens found I can't figure out if this means that the driver is not detecting the video card, or whether it means I have made a mistake in the configuration file. Any help on this would be appreciated. Adelle. |
- Virtual PC 5.2 Adelle L. Hartley
- Re: Virtual PC 5.2 Kent West
- Re: Virtual PC 5.2 Michael Martinell
- Re: Virtual PC 5.2 Kent West
- RE: Virtual PC 5.2 Michael Martinell
- Re: Virtual PC 5.2 Derrick 'dman' Hudson
- RE: Virtual PC 5.2 Michael Martinell
- RE: Virtual PC 5.2 Michael Martinell
- Re: Virtual PC 5.2 bob parker
- Re: Virtual PC 5.2 Derrick 'dman' Hudson
- Re: Virtual PC 5.2 Kent West
- RE: Virtual PC 5.2 Adelle L. Hartley
- Re: Virtual PC 5.2 Kent West