On Fri, Sep 27, 2019 at 01:41:58PM +0100, Jonathan Dowland wrote: > On Mon, Sep 23, 2019 at 03:11:07PM +0500, Alexander V. Makartsev wrote: > > If I understood this right, you have two disks with data and they were > > previously configured as RAID1 volume. > > What make\model RAID-controller do you use? Because "cages" by > > themselves offer only SATA\SAS ports for disks to connect them. > > RAID functionality is provided by OS (software RAID), or RAID-controller > > (hardware RAID). > > This is indeed, key to providing a useful answer. Reading between the lines, > I suspect OP is using Hardware RAID, and most likely, they've lost their > data. > Nope, as mentioned earlier in the thread, very glad to report no such loss occurred. The first advice in this thread was right, and recreating the partition table destroyed by the hardware RAID in the cage fixed it. The filesystem in the partition hadn't been touched.
Mark
