Hi, I'm running a 2.4.22 kernel and using the usb-storage module to access my Olympus C740 digital camera.
I can mount it and view the directories just fine, but when I try to copy more than ~3 photos from it to the hard drive, it freezes. It does this whether I use cp or nautilus or whatever. It just stalls and the copy never finishes, and the data transfer light on the camera goes off. Does anyone know how to correct this problem? Some hardware information is below. Thanks! Dan Lenski ----- /proc/scsi/scsi: Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: OLYMPUS Model: C740UZ Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 ----- lsusb -v: Bus 001 Device 008: ID 07b4:0105 Olympus Optical Co., Ltd Camedia C-700/C-3040/C-4000 Zoom Camera Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x07b4 Olympus Optical Co., Ltd idProduct 0x0105 Camedia C-700/C-3040/C-4000 Zoom Camera bcdDevice 0.01 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 bytes 64 once bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 bytes 64 once bInterval 0 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]