El El dom, 11 jun 2023 a las 4:13, Aleix Piulachs <[email protected]> escribió:
> > > El El dom, 11 jun 2023 a las 3:56, David Christensen < > [email protected]> escribió: > >> On 6/10/23 17:06, Aleix Piulachs wrote: >> > El El dom, 11 jun 2023 a las 0:38, David Christensen < >> > [email protected]> escribió: >> > >> >> On 6/10/23 15:23, David Christensen wrote: >> >>> Does the Setup utility have any settings to control the fan? What are >> >>> the names of the settings, what options are available, and what are >> the >> >>> current settings? >> >> >> >> >> >> Does the Setup utility have any settings related to processor energy >> >> consumption? For example, on my Dell Latitude 5400: >> >> >> >> Settings >> >> Performance >> >> HyperThread Control Disabled >> >> Power Management >> >> Thermal Management Cool >> >> >> >> >> >> David >> >> >> > i use i386 because the computer has 2Gb Ram memory only and was a >> present >> > does 2weeks ago and it has win7 installed but i want to repair the >> computer >> > and to put 1Tb ssd and 8Gb Ram memory it’s the maximum I installed >> bullseye >> > i386 with the little memory.. >> >> On 6/10/23 17:10, Aleix Piulachs wrote: >> > and the laptop is old and don’t supports pwmconfig pwm modules >> >> On 6/10/23 17:36, Aleix Piulachs wrote: >> > i ‘ve been installing fancontrol lm-sensors and I write systemctl >> enable >> > fancontrol and there’s no problem but when I write systemctl start >> > fancontrol there’s a failure code=exited and when i write systemctl >> status >> > fancontrol there’s a failure too I must to check /etc/fancontrol but >> it’s >> > ok I believe >> > [Unit] >> > Description=Start fancontrol, if configured >> > ConditionFileNotEmpty=/etc/fancontrol >> > After=lm-sensors.service >> > [Service] >> > Type=simple >> > PIDFile=/var/run/fancontrol.pid >> > ExecStart=/usr/sbin/fancontrol >> > [Install] >> > WantedBy=multi-user.target >> >> >> Again, please reply to the debian-user list. >> >> >> Again, computer technical support requires facts. This means console >> sessions. Please use script(1) to capture your console sessions (see >> below). >> >> >> Please connect the computer to an AC adapter and connect the AC adapter >> to an AC receptacle. Please verify that the AC adapter is operating and >> providing power to the computer. >> >> >> Looking at the available manuals: >> >> >> https://support.hp.com/us-en/product/hp-compaq-6830s-notebook-pc/3688712/manuals >> >> >> I see the "Computer Setup User Guide" (c01892653.pdf). Follow the >> instructions "Starting Computer Setup" on page 1: >> >> "To start Computer Setup, follow these steps: >> 1. Turn on or restart the computer, and then press esc while the >> “Press the ESC key for Startup Menu” message is displayed at the >> bottom of the screen. >> 2. Press f10 to enter BIOS Setup." >> >> >> Verify or set the following setting: >> >> -> System Configuration >> -> Device Configurations >> -> Fan always on while connected to an AC outlet -> Enable >> >> >> Then save the setting per "Navigating and selecting in Computer Setup" >> (page 3): >> >> "To save your changes and exit Computer Setup menus, click the Save >> icon in the lower-left corner of the screen, and then follow the on- >> screen instructions. >> – or – >> Use the tab key and the arrow keys to select File > Save changes and >> exit, and then press enter. >> >> >> When the computer restarts, but before booting Debian, does the fan >> operate? Fast? Slow? None? >> >> >> Does the fan operate when Debian is booting? Fast? Slow? None? >> >> >> Does the fan operate when Debian displays the login screen? Fast? >> Slow? None? >> >> >> Login. Does the fan operate when the prompt or desktop is displayed? >> Fast? Slow? None? >> >> >> Then run the following commands as root in a terminal to create a >> "typescript" file: >> >> # script >> >> # systemctl status lm-sensors >> >> # systemctl status fancontrol >> >> # exit >> >> >> Copy the file "typescript" to whatever computer you are using for >> e-mail. Display the content with the following command: >> >> $ cat typescript >> >> >> Cut and paste the console session into your reply. Do not paraphrase. >> Do not transcribe manually. >> >> >> David > > > Thanks i have entered the bios and put the fan on > >> >> >> Now the fan works starts it
