Hi, An old Sharp Mebius here has 32 bit bullseye.
When booting, this message appears. ath9k_htc: Device endpoint numbers are not the expected ones In a console, these. $ lsusb Bus 001 Device 002: ID 0cf3:9271 Qualcomm Atheros Communications AR9271 802.11n Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub $ ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group debault qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp0s18: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:40:d0:1b:01:6a brd ff:ff:ff:ff:ff:ff $ lsmod | grep ath9k ath9k_htc 61440 0 ath9k_common 16384 1 ath9k_htc ath9k_hw 421888 2 ath9k_htc,ath9k_common Can anyone explain "Device endpoint numbers are not the expected ones"? Other ideas? Thanks, ... P. - mobile: +1 778 951 5147 VoIP: +1 604 670 0140