On 1/21/24 00:30, Max Nikulin wrote:
On 21/01/2024 03:23, gene heskett wrote:
On 1/20/24 10:24, Max Nikulin wrote:
On 19/01/2024 06:10, gene heskett wrote:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
190 Airflow_Temperature_Cel 0x0032 071 049 000 Old_age
Always - 29
Initial 100 decreased to 49 means that sometimes the drive is hot
enough.
I've been under the impression that 100C was the absolute temp limit
Do not confuse normalized values (100 means shiny new, 0 means really
old or damaged) and RAW_VALUE. For some drives smartctl -x may report
history of temperature measurements, but I think summer values are
already unavailable.
and it not been over 36C that I know of according to gkrellm which s
set to monitor that stuff in real time. Right now nothing in the
system is north of 32C, might get to 36C
71 <-> 29 °C and 49 <-> 36 °C mapping might be possible, but I would
expect higher temperature for 49.
I read up on the manpage.
New -x version for this SSD attached
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-17-rt-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 870 EVO 1TB
Serial Number: S626NF0R302498T
LU WWN Device Id: 5 002538 f413394a5
Firmware Version: SVT01B6Q
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jan 21 00:44:08 2024 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 117) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 094 094 010 - 64
9 Power_On_Hours -O--CK 095 095 000 - 21194
12 Power_Cycle_Count -O--CK 099 099 000 - 86
177 Wear_Leveling_Count PO--C- 099 099 000 - 23
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 094 094 010 - 64
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 094 094 010 - 64
187 Uncorrectable_Error_Cnt -O--CK 099 099 000 - 392
190 Airflow_Temperature_Cel -O--CK 072 047 000 - 28
195 ECC_Error_Rate -O-RC- 199 199 000 - 392
199 CRC_Error_Count -OSRCK 099 099 000 - 2
235 POR_Recovery_Count -O--C- 099 099 000 - 50
241 Total_LBAs_Written -O--CK 099 099 000 - 38429262625
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 SL VS 16 Device vendor specific log
0xa5 SL VS 16 Device vendor specific log
0xce SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 466 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 466 [1] occurred at disk power-on lifetime: 21078 hours (878 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 00 1b a4 0d 18 40 00 Error: WP at LBA = 0x1ba40d18 =
463736088
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 40 00 00 1b a4 0d 18 40 08 1d+03:35:20.430 WRITE FPDMA QUEUED
60 0a 00 00 38 00 00 70 f1 a4 00 40 07 1d+03:35:20.430 READ FPDMA QUEUED
60 07 80 00 30 00 00 70 f1 3c 80 40 06 1d+03:35:20.430 READ FPDMA QUEUED
61 00 28 00 28 00 00 1b a4 0d 38 40 05 1d+03:35:20.430 WRITE FPDMA QUEUED
47 00 00 00 01 00 00 00 00 00 00 40 02 1d+03:35:20.430 READ LOG DMA EXT
Error 465 [0] occurred at disk power-on lifetime: 21078 hours (878 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 10 00 00 1b a4 0d 38 40 00 Error: WP at LBA = 0x1ba40d38 =
463736120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 28 00 10 00 00 1b a4 0d 38 40 02 1d+03:35:13.588 WRITE FPDMA QUEUED
61 00 08 00 f0 00 00 1b a4 0d 18 40 1e 1d+03:35:13.588 WRITE FPDMA QUEUED
60 0a 00 00 e8 00 00 70 f1 a4 00 40 1d 1d+03:35:13.588 READ FPDMA QUEUED
60 07 80 00 e0 00 00 70 f1 3c 80 40 1c 1d+03:35:13.588 READ FPDMA QUEUED
47 00 00 00 01 00 00 00 00 00 00 40 18 1d+03:35:13.588 READ LOG DMA EXT
Error 464 [3] occurred at disk power-on lifetime: 21078 hours (878 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 c0 00 00 1b a4 0d 38 40 00 Error: WP at LBA = 0x1ba40d38 =
463736120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 28 00 c0 00 00 1b a4 0d 38 40 18 1d+03:35:06.711 WRITE FPDMA QUEUED
61 00 08 00 b8 00 00 1b a4 0d 18 40 17 1d+03:35:06.711 WRITE FPDMA QUEUED
60 0a 00 00 78 00 00 70 f1 a4 00 40 0f 1d+03:35:06.711 READ FPDMA QUEUED
60 07 80 00 70 00 00 70 f1 3c 80 40 0e 1d+03:35:06.711 READ FPDMA QUEUED
47 00 00 00 01 00 00 00 00 00 00 40 0a 1d+03:35:06.711 READ LOG DMA EXT
Error 463 [2] occurred at disk power-on lifetime: 21078 hours (878 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 50 00 00 1b a4 0d 38 40 00 Error: WP at LBA = 0x1ba40d38 =
463736120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 28 00 50 00 00 1b a4 0d 38 40 0a 1d+03:34:59.840 WRITE FPDMA QUEUED
61 00 08 00 48 00 00 1b a4 0d 18 40 09 1d+03:34:59.840 WRITE FPDMA QUEUED
60 0a 00 00 40 00 00 70 f1 a4 00 40 08 1d+03:34:59.840 READ FPDMA QUEUED
60 07 80 00 38 00 00 70 f1 3c 80 40 07 1d+03:34:59.840 READ FPDMA QUEUED
61 00 18 00 30 00 00 1b a4 0d 70 40 06 1d+03:34:59.840 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed: read failure 50% 21129
1845372088
# 2 Extended offline Completed: read failure 50% 10917
1845372088
# 3 Extended offline Completed: read failure 50% 10582
1845372088
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
256 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: DST executing in background (3)
Current Temperature: 28 Celsius
Power Cycle Min/Max Temperature: 26/44 Celsius
Lifetime Min/Max Temperature: 24/53 Celsius
Specified Max Operating Temperature: 70 Celsius
Under/Over Temperature Limit Count: 0/0
SMART Status: 0xc24f (PASSED)
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (24)
Index Estimated Time Temperature Celsius
25 2024-01-20 03:30 27 ********
... ..( 21 skipped). .. ********
47 2024-01-20 07:10 27 ********
48 2024-01-20 07:20 28 *********
... ..( 33 skipped). .. *********
82 2024-01-20 13:00 28 *********
83 2024-01-20 13:10 29 **********
... ..( 7 skipped). .. **********
91 2024-01-20 14:30 29 **********
92 2024-01-20 14:40 28 *********
93 2024-01-20 14:50 29 **********
... ..( 2 skipped). .. **********
96 2024-01-20 15:20 29 **********
97 2024-01-20 15:30 28 *********
98 2024-01-20 15:40 29 **********
99 2024-01-20 15:50 29 **********
100 2024-01-20 16:00 29 **********
101 2024-01-20 16:10 28 *********
... ..( 50 skipped). .. *********
24 2024-01-21 00:40 28 *********
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 86 --- Lifetime Power-On Resets
0x01 0x010 4 21194 --- Power-on Hours
0x01 0x018 6 38429262625 --- Logical Sectors Written
0x01 0x020 6 183539981 --- Number of Write Commands
0x01 0x028 6 56715153853 --- Logical Sectors Read
0x01 0x030 6 49722855 --- Number of Read Commands
0x01 0x038 6 1850000 --- Date and Time TimeStamp
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 392 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 3 --- Resets Between Cmd Acceptance and
Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 28 --- Current Temperature
0x05 0x020 1 53 --- Highest Temperature
0x05 0x028 1 24 --- Lowest Temperature
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 18303 --- Number of Hardware Resets
0x06 0x010 4 0 --- Number of ASR Events
0x06 0x018 4 2 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 1 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1063 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 1040 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC