Pigeon's pointing out that the system is not finding a 3c59x card, but rather a Lite-On 82c168. So you've apparently got two NICs in your box, or you're confused about which NIC you have. To activate the Lite-On, yes, you should be able to find the tulip driver in modconf.
From: Pigeon <[EMAIL PROTECTED]>
On Wed, Mar 24, 2004 at 05:53:30PM +0000, Andrew Gilberto wrote:
> So, I've installed bf2.4 on my machine, but it's having problems seeing my 3c59x
> network card.
<snip>
> 1. dmesg shows:
> eth0: Lite-On 82c168 PNIC rev 32 at 0xe800, 00:A0:CC:D3:69:3E, IRQ 11.
"grep -rsi 82c168 *" in the 2.4.18 source tree suggests you should try the tulip driver:
Thanks for the reply. So, I'm not entirely sure what I should do with this information! Should I be able to find the tulip driver listed in modconf then? If so, that confuses me a little since the 3c59x driver is in modconf too, but fails to load.
-- Kent
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
