Josh, I have two main thoughts. First, try to do something like compile
your kernel (when running in a text console :) to make sure your memory
isn't running beyond its limits. If you can compile kernels fine, then
you probably have fine memory. :)
I was getting signal 11s when I had my sync rates set too high. See if
you can set your sync rates lower. (When I had mine set high, sig11.
Changing them lower removed my sig11s. High again, sig11 again. However,
it was quite specifically right at start.)
HTH, good luck.
* Josh Carroll <[EMAIL PROTECTED]> [000909 20:58]:
> I just recently updated to the phase2 debs (version4), and all I get
> is sig11 constantly, at random times. Sometimes as soon as I start X,
> sometimes not for almost an hour. It varies, but it NEVER stays
> resident more than an hour or two. This is really annoying, and I'm
> not sure what the problem is. I'm using the GeForce2 with the latest
> Nvidia drivers (0.9.5). I've attached the log from XFree.
--
Seth Arnold | http://www.willamette.edu/~sarnold/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
