Linux version 2.4.17-32 ([EMAIL PROTECTED]) (gcc version 3.0.4) #1 Sat Mar 16 17:09:00
2
FP[0] enabled: Rev 1 Model 16
The 32-bit Kernel has started...
Determining PDC firmware type: System Map.
model 00005cf0 00000481 00000000 00000002 78281eff 100000f0 00000008 000000b2 02
vers 00000300
CPUID vers 17 rev 10 (0x0000022a)
model 9000/785/C3600
Total Memory: 512 Mb
pagetable_init
On node 0 totalpages: 131072
zone(0): 131072 pages.
zone(1): 0 pages.
zone(2): 0 pages.
LCD display at f05d0008,f05d0000 registered
Kernel command line: root=/dev/sdb6 HOME=/ console=tty0 sti=10/6/2/0 sti_font=Vx
Console: colour dummy device 160x64
Calibrating delay loop... 1101.00 BogoMIPS
Memory: 513012k available
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Searching for devices...
Found devices:
1. Astro BC Runway Port (12) at 0xfed00000 [10], versions 0x582, 0x0, 0xb
2. Elroy PCI Bridge (13) at 0xfed30000 [10/0], versions 0x782, 0x0, 0xa
3. Elroy PCI Bridge (13) at 0xfed32000 [10/1], versions 0x782, 0x0, 0xa
4. Elroy PCI Bridge (13) at 0xfed38000 [10/4], versions 0x782, 0x0, 0xa
5. Elroy PCI Bridge (13) at 0xfed3c000 [10/6], versions 0x782, 0x0, 0xa
6. Allegro W+ (0) at 0xfffa0000 [32], versions 0x5cf, 0x0, 0x4
7. Memory (1) at 0xfed10200 [49], versions 0x9c, 0x0, 0x9
CPU(s): 1 x PA8600 (PCX-W+) at 552.000000 MHz
SBA found Astro 2.1 at 0xfed00000
lba version TR4.0 (0x5) found at 0xfed30000
lba version TR4.0 (0x5) found at 0xfed32000
lba version TR4.0 (0x5) found at 0xfed38000
lba version TR4.0 (0x5) found at 0xfed3c000
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Enabled soft power switch (polling mode, io=0xf0400804).
SuperIO: Found NS87560 Legacy I/O device at 00:0e.1 (IRQ 64)
SuperIO: Serial port 1 at 0x3f8
SuperIO: Serial port 2 at 0x2f8
SuperIO: Parallel port at 0x378
SuperIO: Floppy controller at 0x3f0
SuperIO: ACPI at 0x7e0
SuperIO: USB regulator enabled
parport0: PC-style at 0x378, irq 101 [PCSPP(,...)]
Starting kswapd
Journalled Block Device driver loaded
STI PCI ROM enabled at 0xf7000000
PCI graphic ROM found at f7000000 (128 kB), fb @ fb000000 (16 MB)
PCI region 0: fb000000 with 16384 kB
PCI region 1: 00000000 with 0 kB
PCI region 2: fa000000 with 16384 kB
PCI region 3: 00000000 with 0 kB
PCI region 4: 00000000 with 0 kB
PCI region 5: 00000000 with 0 kB
PCI region 6: f7000000 with 128 kB
PCI region 7: 00000000 with 0 kB
PCI region 8: 00000000 with 0 kB
PCI region 9: 00000000 with 0 kB
PCI region 10: 00000000 with 0 kB
PCI region 11: 00000000 with 0 kB
Trying PCI STI ROM at f7000000, PCI hpa at fb000000
STI word mode ROM at f7000044, hpa=fb000000
STI word mode ROM, id 35acda16-9a02587, conforms to spec rev. 8.0c
STI PCI ROM disabled
STI device: HPA4982A
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ed
ttyS00 at port 0x03f8 (irq = 99) is a 16550A
ttyS01 at port 0x02f8 (irq = 100) is a 16550A
lp0: using parport0 (interrupt-driven).
Generic RTC Driver v1.02 05/27/1999 Sam Creasey ([EMAIL PROTECTED])
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NS87415: IDE controller on PCI bus 00 dev 70
NS87415: chipset revision 3
NS87415: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0a00-0x0a07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x0a08-0x0a0f, BIOS settings: hdc:pio, hdd:pio
hda: FX4820T, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 103
hda: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
loop: loaded (max 8 devices)
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
tulip0: no phy info, aborting mtable build
tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1.
eth0: Digital DS21143 Tulip rev 65 at 0x1000, 00:10:83:FF:A8:2F, IRQ 66.
tulip1: EEPROM default media type Autosense.
tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip1: MII transceiver #1 config 3100 status 7849 advertising 0101.
tulip1: Advertising 01e1 on PHY 1, previously advertising 0101.
eth1: Digital DS21143 Tulip rev 65 at 0x12100, 00:10:83:FB:A9:AB, IRQ 129.
tulip2: EEPROM default media type Autosense.
tulip2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip2: MII transceiver #1 config 3100 status 7849 advertising 0101.
tulip2: Advertising 01e1 on PHY 1, previously advertising 0101.
eth2: Digital DS21143 Tulip rev 65 at 0x12000, 00:10:83:FB:C9:33, IRQ 128.
SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 15, function 0
sym53c8xx: 53c896 detected
sym53c8xx: at PCI bus 0, device 15, function 1
sym53c8xx: 53c896 detected
sym53c896-0: rev 0x4 on pci bus 0 device 15 function 0 irq 65
sym53c896-0: ID 7, Fast-20, Parity Checking
sym53c896-0: handling phase mismatch from SCRIPTS.
sym53c896-1: rev 0x4 on pci bus 0 device 15 function 1 irq 65
sym53c896-1: ID 7, Fast-40, Parity Checking
sym53c896-1: handling phase mismatch from SCRIPTS.
scsi0 : sym53c8xx-1.7.3c-20010512
scsi1 : sym53c8xx-1.7.3c-20010512
Vendor: QUANTUM Model: ATLAS10KII-18LVD Rev: HP03
Type: Direct-Access ANSI SCSI revision: 03
Vendor: QUANTUM Model: ATLAS10KII-18LVD Rev: HP03
Type: Direct-Access ANSI SCSI revision: 03
Attached scsi disk sda at scsi1, channel 0, id 5, lun 0
Attached scsi disk sdb at scsi1, channel 0, id 6, lun 0
sym53c896-1-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB)
Partition check:
sda: sda1 sda2 < sda5 sda6 sda7 >
sym53c896-1-<6,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB)
sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
sticonsole_init: searching for STI ROMs
Console: switching to colour STI console 160x64
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 1330.000 MB/sec
8regs_prefetch: 1330.000 MB/sec
32regs : 944.800 MB/sec
32regs_prefetch: 944.800 MB/sec
raid5: using function: 8regs_prefetch (1330.000 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
NOT FREEING INITMEM (383k)
Adding Swap: 1166312k swap-space (priority -1)
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
=============================================
HPA4982A
=============================================
PCI info
pci bus 0x3 cardnum 0x02 function 0x0000: vendor 0x103c device 0x108b
HP Device unknown
CardVendor 0x103c card 0x108c (HP, Card unknown)
STATUS 0x02a0 COMMAND 0x0046
CLASS 0x03 0x02 0x00 REVISION 0x03
BIST 0x00 HEADER 0x00 LATENCY 0xff CACHE 0x00
BASE0 0xfb00000c addr 0xfb000000 MEM PREFETCHABLE 64BIT
BASE2 0xfa000004 addr 0xfa000000 MEM 64BIT
BASEROM 0xf7000000 addr 0xf7000000 not-decode-enabled
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x00
------------------------------------------------
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
