On 6/1/2012 1:57 AM, Jonathan Nieder wrote:
Worrisome. Can you send a full kernel log from booting and doing this, including the boot-up sequence? Please send it as an attachment if possible so the log doesn't get corrupted in transit (e.g. by line wrapping).
Saved the log from partedmagic too just in case it can help. Looks like the ring buffer here is too small to keep the earliest boot messages.
root@PartedMagic:~# uname -a Linux PartedMagic 3.3.6-pmagic #1 SMP Sat May 12 20:01:06 CDT 2012 i686 Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz GenuineIntel GNU/Linux [ 0.303349] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff] [ 0.303669] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.303988] pci_bus 0000:06: resource 9 [mem 0xd7f00000-0xfebfffff] [ 0.304334] NET: Registered protocol family 2 [ 0.304677] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.305082] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.305904] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.306367] TCP: Hash tables configured (established 131072 bind 65536) [ 0.306688] TCP reno registered [ 0.306995] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.307335] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.307692] NET: Registered protocol family 1 [ 0.308104] RPC: Registered named UNIX socket transport module. [ 0.308422] RPC: Registered udp transport module. [ 0.308735] RPC: Registered tcp transport module. [ 0.309061] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.331043] pci 0000:01:00.0: Boot video device [ 0.331379] PCI: CLS 32 bytes, default 64 [ 0.331725] Trying to unpack rootfs image as initramfs... [ 0.440926] Freeing initrd memory: 38420k freed [ 0.453397] audit: initializing netlink socket (disabled) [ 0.453728] type=2000 audit(1338532572.452:1): initialized [ 0.454640] highmem bounce pool size: 64 pages [ 0.459860] VFS: Disk quotas dquot_6.5.2 [ 0.460287] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.460734] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.461297] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.461618] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.462329] aufs 3.3-20120402 [ 0.462635] msgmni has been set to 1421 [ 0.466088] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.466666] io scheduler noop registered [ 0.466973] io scheduler deadline registered [ 0.467307] io scheduler cfq registered (default) [ 0.467989] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.468433] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.468869] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.469337] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.469768] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X [ 0.470411] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.471043] isapnp: Scanning for PnP cards... [ 0.826975] isapnp: No Plug & Play device found [ 0.833490] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.098144] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.119600] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.123779] brd: module loaded [ 1.180634] loop: module loaded [ 1.181738] Loading iSCSI transport class v2.0-870. [ 1.183443] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.184214] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.184545] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.185132] mousedev: PS/2 mouse device common for all mice [ 1.185756] EISA: Probing bus 0 at eisa.0 [ 1.186106] EISA: Cannot allocate resource for mainboard [ 1.186420] Cannot allocate resource for EISA slot 1 [ 1.186733] Cannot allocate resource for EISA slot 2 [ 1.187058] Cannot allocate resource for EISA slot 3 [ 1.187370] Cannot allocate resource for EISA slot 4 [ 1.187681] Cannot allocate resource for EISA slot 5 [ 1.187992] Cannot allocate resource for EISA slot 6 [ 1.188325] Cannot allocate resource for EISA slot 7 [ 1.188637] Cannot allocate resource for EISA slot 8 [ 1.188948] EISA: Detected 0 cards. [ 1.189275] cpuidle: using governor ladder [ 1.189583] cpuidle: using governor menu [ 1.190029] TCP cubic registered [ 1.190334] Initializing XFRM netlink socket [ 1.190646] NET: Registered protocol family 17 [ 1.191120] Registering the dns_resolver key type [ 1.191450] Using IPI No-Shortcut mode [ 1.299537] registered taskstats version 1 [ 1.300194] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.300612] Freeing unused kernel memory: 556k freed [ 1.301106] Write protecting the kernel text: 3548k [ 1.301451] Write protecting the kernel read-only data: 1340k [ 1.454034] Refined TSC clocksource calibration: 2833.010 MHz. [ 1.454039] Switching to clocksource tsc [ 1.527281] ------------[ cut here ]------------ [ 1.527289] WARNING: at arch/x86/kernel/apic/ipi.c:109 default_send_IPI_mask_logical+0x2d/0x85() [ 1.527291] Hardware name: EP45-UD3P [ 1.527292] empty IPI mask [ 1.527294] Modules linked in: [ 1.527299] Pid: 1609, comm: blkid Not tainted 3.3.6-pmagic #1 [ 1.527301] Call Trace: [ 1.527305] [<c1027abe>] warn_slowpath_common+0x68/0x7d [ 1.527308] [<c1018b53>] ? default_send_IPI_mask_logical+0x2d/0x85 [ 1.527311] [<c1027b46>] warn_slowpath_fmt+0x2b/0x2f [ 1.527315] [<c1018b53>] default_send_IPI_mask_logical+0x2d/0x85 [ 1.527318] [<c101747a>] native_send_call_func_ipi+0x4a/0x4e [ 1.527322] [<c10637d8>] smp_call_function_many+0x182/0x1ac [ 1.527326] [<c10e94c3>] ? buffer_cpu_notify+0x5f/0x5f [ 1.527328] [<c10e94c3>] ? buffer_cpu_notify+0x5f/0x5f [ 1.527332] [<c1063821>] smp_call_function+0x1f/0x23 [ 1.527334] [<c106383a>] on_each_cpu+0x15/0x38 [ 1.527337] [<c10e9055>] invalidate_bh_lrus+0x19/0x1b [ 1.527339] [<c10ed950>] kill_bdev+0x1a/0x28 [ 1.527343] [<c10ee439>] __blkdev_put+0x62/0x10c [ 1.527345] [<c1047280>] ? should_resched+0x8/0x22 [ 1.527349] [<c10ee5c0>] blkdev_put+0xdd/0xe3 [ 1.527352] [<c10ee5e5>] blkdev_close+0x1f/0x21 [ 1.527355] [<c10ca6aa>] fput+0xdf/0x164 [ 1.527359] [<c10c7e2a>] filp_close+0x5c/0x66 [ 1.527361] [<c10c83bd>] sys_close+0x6d/0xa0 [ 1.527365] [<c137436c>] syscall_call+0x7/0xb [ 1.527369] [<c1370000>] ? pcpu_dump_alloc_info+0x4f/0x1d9 [ 1.527372] ---[ end trace e763ce896ce2d360 ]--- [ 1.933077] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.933119] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.933123] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.933402] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.937297] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.937345] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf1405000 [ 1.943012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.943030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.943032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.943034] usb usb1: Product: EHCI Host Controller [ 1.943036] usb usb1: Manufacturer: Linux 3.3.6-pmagic ehci_hcd [ 1.943038] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.943213] hub 1-0:1.0: USB hub found [ 1.943220] hub 1-0:1.0: 6 ports detected [ 1.943373] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.943376] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.943498] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.947398] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.948094] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf1404000 [ 1.954017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.954037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.954040] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.954046] usb usb2: Product: EHCI Host Controller [ 1.954048] usb usb2: Manufacturer: Linux 3.3.6-pmagic ehci_hcd [ 1.954050] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.954201] hub 2-0:1.0: USB hub found [ 1.954205] hub 2-0:1.0: 6 ports detected [ 1.968055] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.968064] ACPI: Power Button [PWRB] [ 1.968159] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.968163] ACPI: Power Button [PWRF] [ 1.968289] ahci 0000:00:1f.2: version 3.0 [ 1.968331] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.968380] ahci: SSS flag set, parallel bus scan disabled [ 1.968411] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.968414] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems [ 1.968418] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.979429] scsi0 : ahci [ 1.979502] scsi1 : ahci [ 1.979577] scsi2 : ahci [ 1.979646] scsi3 : ahci [ 1.979702] scsi4 : ahci [ 1.979757] scsi5 : ahci [ 1.979891] ata1: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406100 irq 45 [ 1.979895] ata2: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406180 irq 45 [ 1.979897] ata3: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406200 irq 45 [ 1.979900] ata4: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406280 irq 45 [ 1.979902] ata5: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406300 irq 45 [ 1.979905] ata6: SATA max UDMA/133 abar m2048@0xf1406000 port 0xf1406380 irq 45 [ 1.990038] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.990042] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.990283] scsi6 : ahci [ 1.990341] scsi7 : ahci [ 1.990417] ata7: SATA max UDMA/133 abar m8192@0xf1100000 port 0xf1100100 irq 19 [ 1.990420] ata8: SATA max UDMA/133 abar m8192@0xf1100000 port 0xf1100180 irq 19 [ 2.046207] Linux agpgart interface v0.103 [ 2.168216] uhci_hcd: USB Universal Host Controller Interface driver [ 2.168251] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.168254] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.168434] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.168467] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 [ 2.168494] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.168496] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.168499] usb usb3: Product: UHCI Host Controller [ 2.168500] usb usb3: Manufacturer: Linux 3.3.6-pmagic uhci_hcd [ 2.168502] usb usb3: SerialNumber: 0000:00:1a.0 [ 2.168593] hub 3-0:1.0: USB hub found [ 2.168597] hub 3-0:1.0: 2 ports detected [ 2.168708] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.168712] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.168753] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.168787] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100 [ 2.168817] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.168819] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.168821] usb usb4: Product: UHCI Host Controller [ 2.168823] usb usb4: Manufacturer: Linux 3.3.6-pmagic uhci_hcd [ 2.168825] usb usb4: SerialNumber: 0000:00:1a.1 [ 2.168951] hub 4-0:1.0: USB hub found [ 2.168955] hub 4-0:1.0: 2 ports detected [ 2.169098] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 2.169101] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.169163] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 2.169185] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e200 [ 2.169210] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.169212] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.169214] usb usb5: Product: UHCI Host Controller [ 2.169216] usb usb5: Manufacturer: Linux 3.3.6-pmagic uhci_hcd [ 2.169218] usb usb5: SerialNumber: 0000:00:1a.2 [ 2.169329] hub 5-0:1.0: USB hub found [ 2.169333] hub 5-0:1.0: 2 ports detected [ 2.169462] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.169465] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.169501] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 2.169523] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 2.169553] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.169555] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.169557] usb usb6: Product: UHCI Host Controller [ 2.169559] usb usb6: Manufacturer: Linux 3.3.6-pmagic uhci_hcd [ 2.169561] usb usb6: SerialNumber: 0000:00:1d.0 [ 2.169641] hub 6-0:1.0: USB hub found [ 2.169644] hub 6-0:1.0: 2 ports detected [ 2.169806] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.169809] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.169871] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 2.169898] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 2.169924] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.169926] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.169928] usb usb7: Product: UHCI Host Controller [ 2.169930] usb usb7: Manufacturer: Linux 3.3.6-pmagic uhci_hcd [ 2.169932] usb usb7: SerialNumber: 0000:00:1d.1 [ 2.170081] hub 7-0:1.0: USB hub found [ 2.170085] hub 7-0:1.0: 2 ports detected [ 2.170196] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.170199] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.170260] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 2.170281] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 2.170306] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.170308] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.170310] usb usb8: Product: UHCI Host Controller [ 2.170312] usb usb8: Manufacturer: Linux 3.3.6-pmagic uhci_hcd [ 2.170313] usb usb8: SerialNumber: 0000:00:1d.2 [ 2.170450] hub 8-0:1.0: USB hub found [ 2.170454] hub 8-0:1.0: 2 ports detected [ 2.205219] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 2.205774] scsi8 : pata_jmicron [ 2.205904] scsi9 : pata_jmicron [ 2.206475] ata9: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16 [ 2.206478] ata10: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16 [ 2.256012] usb 2-2: new high-speed USB device number 2 using ehci_hcd [ 2.295029] ata7: SATA link down (SStatus 0 SControl 300) [ 2.295062] ata8: SATA link down (SStatus 0 SControl 300) [ 2.367324] rtc_cmos 00:04: RTC can wake from S4 [ 2.367433] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.367457] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.372631] usb 2-2: New USB device found, idVendor=0930, idProduct=6545 [ 2.372634] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.372637] usb 2-2: Product: DataTraveler 108 [ 2.372638] usb 2-2: Manufacturer: Kingston [ 2.372640] usb 2-2: SerialNumber: 00187D1174B5EB30A0009E7C [ 2.439020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.441096] ata1.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 2.441099] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.443570] ata1.00: configured for UDMA/133 [ 2.443671] scsi 0:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 2.443869] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.443920] sd 0:0:0:0: [sda] Write Protect is off [ 2.443922] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.443941] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.447801] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.447886] r8169 0000:04:00.0: irq 46 for MSI/MSI-X [ 2.448076] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xefb60000, 00:24:1d:2f:33:0b, XID 1c4000c0 IRQ 46 [ 2.448079] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 2.448094] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.448157] r8169 0000:05:00.0: irq 47 for MSI/MSI-X [ 2.448309] r8169 0000:05:00.0: eth1: RTL8168c/8111c at 0xefb62000, 00:1f:d0:81:6f:cb, XID 1c4000c0 IRQ 47 [ 2.448312] r8169 0000:05:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 2.450862] wmi: Mapper loaded [ 2.474017] usb 2-4: new high-speed USB device number 3 using ehci_hcd [ 2.489200] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 2.489688] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.605432] Initializing USB Mass Storage driver... [ 2.606079] scsi10 : usb-storage 2-2:1.0 [ 2.606146] usbcore: registered new interface driver usb-storage [ 2.606148] USB Mass Storage support registered. [ 2.647307] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.718636] usb 2-4: New USB device found, idVendor=046d, idProduct=0990 [ 2.718639] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 2.718641] usb 2-4: SerialNumber: A6BEA356 [ 2.722445] Marking TSC unstable due to TSC halts in idle [ 2.722451] ACPI: acpi_idle registered with cpuidle [ 2.722975] Switching to clocksource hpet [ 2.907021] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.160020] usb 8-1: new full-speed USB device number 2 using uhci_hcd [ 3.322958] ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 3.322963] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.328386] ata2.00: configured for UDMA/133 [ 3.328512] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5 [ 3.328679] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 3.328682] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 3.328723] sd 1:0:0:0: [sdb] Write Protect is off [ 3.328726] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.328744] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.328925] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.331314] usb 8-1: New USB device found, idVendor=046d, idProduct=c049 [ 3.331318] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.331321] usb 8-1: Product: USB Gaming Mouse [ 3.331323] usb 8-1: Manufacturer: Logitech [ 3.391532] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2 [ 3.391608] generic-usb 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1/input0 [ 3.395402] generic-usb 0003:046D:C049.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1/input1 [ 3.395424] usbcore: registered new interface driver usbhid [ 3.395425] usbhid: USB HID core driver [ 3.448168] sdb: sdb1 [ 3.448411] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.543027] usb 8-2: new low-speed USB device number 3 using uhci_hcd [ 3.608934] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 108 PMAP PQ: 0 ANSI: 0 CCS [ 3.609130] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 3.609771] sd 10:0:0:0: [sdc] 7826688 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 3.610273] sd 10:0:0:0: [sdc] Write Protect is off [ 3.610277] sd 10:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 3.610768] sd 10:0:0:0: [sdc] No Caching mode page present [ 3.610770] sd 10:0:0:0: [sdc] Assuming drive cache: write through [ 3.613891] sd 10:0:0:0: [sdc] No Caching mode page present [ 3.613893] sd 10:0:0:0: [sdc] Assuming drive cache: write through [ 3.614666] sdc: sdc1 [ 3.616770] sd 10:0:0:0: [sdc] No Caching mode page present [ 3.616773] sd 10:0:0:0: [sdc] Assuming drive cache: write through [ 3.616776] sd 10:0:0:0: [sdc] Attached SCSI removable disk [ 3.705314] usb 8-2: New USB device found, idVendor=046d, idProduct=c315 [ 3.705318] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.705321] usb 8-2: Product: Logitech USB Keyboard [ 3.705324] usb 8-2: Manufacturer: Logitech [ 3.722526] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3 [ 3.722630] generic-usb 0003:046D:C315.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-2/input0 [ 3.789021] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.223508] ata3.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 4.223512] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.230621] ata3.00: configured for UDMA/133 [ 4.230736] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5 [ 4.230882] sd 2:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 4.230885] sd 2:0:0:0: [sdd] 4096-byte physical blocks [ 4.230925] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 4.230929] sd 2:0:0:0: [sdd] Write Protect is off [ 4.230932] sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.230951] sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.339958] sdd: sdd1 [ 4.340210] sd 2:0:0:0: [sdd] Attached SCSI disk [ 4.692037] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.697698] ata4.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 4.697703] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.703406] ata4.00: configured for UDMA/133 [ 4.703506] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5 [ 4.703644] sd 3:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.703686] sd 3:0:0:0: [sde] Write Protect is off [ 4.703688] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 4.703707] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.703876] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 4.728837] sde: sde1 [ 4.729055] sd 3:0:0:0: [sde] Attached SCSI disk [ 5.164038] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.167646] ata5.00: ATAPI: PIONEER BD-RW BDR-207D, 1.20, max UDMA/100 [ 5.171463] ata5.00: configured for UDMA/100 [ 5.192572] scsi 4:0:0:0: CD-ROM PIONEER BD-RW BDR-207D 1.20 PQ: 0 ANSI: 5 [ 5.213551] sr0: scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray [ 5.213555] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.213705] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 5.213781] sr 4:0:0:0: Attached scsi generic sg5 type 5 [ 5.673034] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.675486] ata6.00: ATAPI: ASUS DRW-24B1ST a, 1.04, max UDMA/100 [ 5.676339] ata6.00: configured for UDMA/100 [ 5.679531] scsi 5:0:0:0: CD-ROM ASUS DRW-24B1ST a 1.04 PQ: 0 ANSI: 5 [ 5.682880] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.683043] sr 5:0:0:0: Attached scsi CD-ROM sr1 [ 5.683118] sr 5:0:0:0: Attached scsi generic sg6 type 5 [ 5.884847] usbcore: registered new interface driver uas [ 5.988265] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16) [ 6.000061] firewire_ohci: Added fw-ohci device 0000:06:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 6.210061] skipping empty audio interface (v1) [ 6.210069] snd-usb-audio: probe of 2-4:1.0 failed with error -5 [ 6.210079] skipping empty audio interface (v1) [ 6.210083] snd-usb-audio: probe of 2-4:1.1 failed with error -5 [ 6.281595] ppdev: user-space parallel port driver [ 6.310674] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 6.322552] hda_codec: ALC889A: BIOS auto-probing. [ 6.331633] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input4 [ 6.331703] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5 [ 6.331762] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6 [ 6.331823] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7 [ 6.331884] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 6.331940] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 6.331995] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 6.332124] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 6.332355] hda_intel: Disabling MSI [ 6.339549] [drm] Initialized drm 1.1.0 20060810 [ 6.501132] firewire_core: created device fw0: GUID 0044edda0000241d, S400 [ 6.540015] HDMI status: Codec=0 Pin=4 Presence_Detect=0 ELD_Valid=0 [ 6.543014] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 6.543096] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12 [ 6.543169] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input13 [ 6.545087] [drm] nouveau 0000:01:00.0: Detected an NVd0 generation card (0x0d9000a1) [ 6.545091] [drm] nouveau 0000:01:00.0: acceleration disabled by default, pass noaccel=0 to force enable [ 6.547815] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 6.553275] usbcore: registered new interface driver snd-usb-audio [ 6.593908] Linux video capture interface: v2.00 [ 6.623329] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 6.623333] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 6.623335] [drm] nouveau 0000:01:00.0: Bios version 75.19.1b.00 [ 6.623338] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 6.624448] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do [ 6.624451] [drm] nouveau 0000:01:00.0: DCB version 4.0 [ 6.624453] [drm] nouveau 0000:01:00.0: DCB outp 00: 02000300 00000000 [ 6.624455] [drm] nouveau 0000:01:00.0: DCB outp 01: 01000302 00020030 [ 6.624458] [drm] nouveau 0000:01:00.0: DCB outp 02: 02011362 00020010 [ 6.624459] [drm] nouveau 0000:01:00.0: DCB outp 03: 04022310 00000000 [ 6.624461] [drm] nouveau 0000:01:00.0: DCB conn 00: 00001030 [ 6.624464] [drm] nouveau 0000:01:00.0: DCB conn 01: 00002161 [ 6.624466] [drm] nouveau 0000:01:00.0: DCB conn 02: 00000200 [ 6.624471] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x72B1 [ 6.630712] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990) [ 6.645801] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input14 [ 6.645934] usbcore: registered new interface driver uvcvideo [ 6.645936] USB Video Class driver (1.1.1) [ 6.674634] [drm] nouveau 0000:01:00.0: 0x78BC: Condition still not met after 20ms, skipping following opcodes [ 6.674647] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7925 [ 6.681550] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x890E [ 6.681552] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x890F [ 6.681598] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x8A00 [ 6.681600] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8A65 [ 6.701604] [drm] nouveau 0000:01:00.0: 0x726F: Condition still not met after 20ms, skipping following opcodes [ 6.702369] [drm] nouveau 0000:01:00.0: 2 available performance level(s) [ 6.702373] [drm] nouveau 0000:01:00.0: 1: core 270MHz shader 540MHz memory 405MHz timing 3 voltage 900mV [ 6.702376] [drm] nouveau 0000:01:00.0: 3: core 810MHz shader 1620MHz memory 600MHz timing 4 voltage 1040mV [ 6.702466] [drm] nouveau 0000:01:00.0: c: core 270MHz shader 540MHz memory 405MHz voltage 900mV [ 6.704823] [TTM] Zone kernel: Available graphics memory: 364160 kiB. [ 6.704825] [TTM] Zone highmem: Available graphics memory: 1747940 kiB. [ 6.704826] [TTM] Initializing pool allocator. [ 6.704835] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM [ 6.704841] mtrr: type mismatch for d8000000,8000000 old: write-back new: write-combining [ 6.704852] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 6.707293] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.707295] [drm] No driver support for vblank timestamp query. [ 6.785165] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0xe0000, bo ee6a1400 [ 6.785241] fbcon: nouveaufb (fb0) is primary device [ 6.847105] [drm] nouveau 0000:01:00.0: EvoCh: chid 0 mthd 0x0708 data 0x31ec6000 0x00004708 0x00002000 [ 6.870292] Console: switching to colour frame buffer device 160x64 [ 6.875932] fb0: nouveaufb frame buffer device [ 6.875933] drm: registered panic notifier [ 6.875937] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 8.074070] tpm_tis 00:09: Adjusting TPM timeout parameters. [ 8.872097] parport_pc 00:08: reported by Plug and Play ACPI [ 8.872152] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 10.036912] SQUASHFS error: Can't find a SQUASHFS superblock on sdc [ 10.043785] VFS: Can't find a romfs filesystem on dev sdc. [ 16.009347] aufs test_add:261:mount[2546]: uid/gid/perm /branches/fmu 0/0/0755, 0/0/01777 [ 16.009352] aufs test_add:261:mount[2546]: uid/gid/perm /branches/sqfs 0/0/0755, 0/0/01777 [ 18.104858] mdadm: sending ioctl 1261 to a partition! [ 18.104863] mdadm: sending ioctl 1261 to a partition! [ 18.104869] mdadm: sending ioctl 1261 to a partition! [ 18.104875] mdadm: sending ioctl 1261 to a partition! [ 18.105000] mdadm: sending ioctl 1261 to a partition! [ 18.105014] mdadm: sending ioctl 1261 to a partition! [ 18.105021] mdadm: sending ioctl 1261 to a partition! [ 18.105029] mdadm: sending ioctl 1261 to a partition! [ 18.105136] mdadm: sending ioctl 1261 to a partition! [ 18.105140] mdadm: sending ioctl 1261 to a partition! [ 18.579398] fuse init (API version 7.18) [ 18.842813] device-mapper: uevent: version 1.0.3 [ 18.843010] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-de...@redhat.com [ 19.315147] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 23.866337] dmeventd (4000): /proc/4000/oom_adj is deprecated, please use /proc/4000/oom_score_adj instead. [ 27.942720] scsi_verify_blk_ioctl: 38 callbacks suppressed [ 27.942723] disktype: sending ioctl 5305 to a partition! [ 27.942725] disktype: sending ioctl 5305 to a partition! [ 28.933426] Bluetooth: Core ver 2.16 [ 28.933443] NET: Registered protocol family 31 [ 28.933444] Bluetooth: HCI device and connection manager initialized [ 28.933480] Bluetooth: HCI socket layer initialized [ 28.933482] Bluetooth: L2CAP socket layer initialized [ 28.933486] Bluetooth: SCO socket layer initialized [ 29.069861] Bluetooth: RFCOMM TTY layer initialized [ 29.069865] Bluetooth: RFCOMM socket layer initialized [ 29.069867] Bluetooth: RFCOMM ver 1.11 [ 29.355319] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 29.355322] Bluetooth: BNEP filters: protocol multicast [ 29.441656] NET: Registered protocol family 10 [ 29.485117] Bridge firewalling registered [ 39.015846] r8169 0000:04:00.0: eth0: link down [ 39.015955] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 49.510721] r8169 0000:05:00.0: eth1: link down [ 49.510728] r8169 0000:05:00.0: eth1: link down [ 49.510840] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 51.898257] r8169 0000:05:00.0: eth1: link up [ 51.898385] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 62.418007] eth1: no IPv6 routers present [ 163.452872] console [netcon0] enabled [ 163.454596] netconsole: network logging started [ 197.293619] [drm] nouveau 0000:01:00.0: PDISP: DCB for 6/0xbad00103 not found [ 197.293619] [drm] nouveau 0000:01:00.0: PDISP: DCB for 0/0xbad00103 not found [ 197.293619] [drm] nouveau 0000:01:00.0: Table 0x0103 not found for 0/2, using first [ 199.320529] BUG: unable to handle kernel paging request at a8916100 [ 199.320608] IP: [<f01adde9>] nv50_display_flip_next+0x54c/0x1c60 [nouveau] [ 199.320673] *pde = 00000000 [ 199.320698] Oops: 0002 [#1] SMP [ 199.320730] Modules linked in: netconsole bridge ipv6 stp llc bnep snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss rfcomm bluetooth rfkill nfsd exportfs dm_mod fuse vfat fat tpm_infineon uvcvideo videobuf2_core videodev videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi nouveau ttm drm_kms_helper drm snd_hda_codec_realtek snd_hda_intel snd_hda_codec ppdev mxm_wmi snd_usb_audio parport_pc ata_generic psmouse video pata_acpi snd_pcm tpm_tis intel_agp firewire_ohci tpm intel_gtt uas usbhid hid snd_hwdep snd_usbmidi_lib snd_rawmidi snd_seq_device processor mac_hid sg usb_storage thermal_sys evdev tpm_bios wmi r8169 parport rtc_cmos hwmon firewire_core mii pata_jmicron uhci_hcd i2c_i801 serio_raw snd_timer agpgart snd ahci button libahci ehci_hcd soundcore snd_page_alloc [ 199.321010] [ 199.321010] Pid: 5211, comm: Xorg Tainted: G W 3.3.6-pmagic #1 Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P [ 199.321010] EIP: 0060:[<f01adde9>] EFLAGS: 00213246 CPU: 2 [ 199.321010] EIP is at nv50_display_flip_next+0x54c/0x1c60 [nouveau] [ 199.321010] EAX: edc16000 EBX: 00000002 ECX: 00000000 EDX: 2eb40040 [ 199.321010] ESI: ee250400 EDI: ee6bfb00 EBP: eddabd58 ESP: eddabd44 [ 199.321010] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 199.321010] Process Xorg (pid: 5211, ti=eddaa000 task=e974ee80 task.ti=eddaa000) [ 199.321010] Stack: [ 199.321010] 00000008 00642000 ee6bfb28 ee2bc000 00000000 eddabd68 f01af547 ee2bc000 [ 199.321010] 00000000 eddabd80 f01afb80 00000000 eddabe3c ee6a1c7c f01ba6e8 eddabe10 [ 199.321010] f00afe3f ee6a1c7c 00000002 0000000c f00970e1 f009a8bc ee2be004 c11b6d07 [ 199.321010] Call Trace: [ 199.321010] [<f01af547>] nvd0_display_flip_stop+0x31/0x294 [nouveau] [ 199.321010] [<f01afb80>] nvd0_display_flip_next+0x3d6/0x970 [nouveau] [ 199.321010] [<f00afe3f>] drm_crtc_helper_set_config+0x68e/0x847 [drm_kms_helper] [ 199.321010] [<c11b6d07>] ? vsnprintf+0x20f/0x266 [ 199.321010] [<f00887f2>] drm_mode_setcrtc+0x29d/0x2d6 [drm] [ 199.321010] [<f0088555>] ? drm_mode_setplane+0x27a/0x27a [drm] [ 199.321010] [<f007df2a>] drm_ioctl+0x270/0x32f [drm] [ 199.321010] [<f0088555>] ? drm_mode_setplane+0x27a/0x27a [drm] [ 199.321010] [<c1059149>] ? timekeeping_get_ns+0x10/0x47 [ 199.321010] [<f007dcba>] ? drm_getsarea+0x112/0x112 [drm] [ 199.321010] [<c10d528c>] vfs_ioctl+0x20/0x2a [ 199.321010] [<c10d5c40>] do_vfs_ioctl+0x404/0x442 [ 199.321010] [<c105e660>] ? clockevents_program_event+0xee/0x10b [ 199.321010] [<c105f4db>] ? tick_program_event+0x24/0x29 [ 199.321010] [<c1041a30>] ? hrtimer_interrupt+0x11d/0x1ac [ 199.321010] [<c10ca5e3>] ? fput+0x18/0x164 [ 199.321010] [<c10d5cbc>] sys_ioctl+0x3e/0x62 [ 199.321010] [<c137436c>] syscall_call+0x7/0xb [ 199.321010] Code: 0c 89 c2 89 45 f0 89 f0 89 4d ec e8 9c ff ff ff 8b 4d ec 89 c2 c1 ea 02 01 d1 81 f9 ff 03 00 00 76 66 6b c3 14 31 c9 8b 44 07 10 <c7> 04 90 00 00 00 20 8b 55 f0 89 f0 e8 85 ff ff ff 89 d8 ba 00 [ 199.321010] EIP: [<f01adde9>] nv50_display_flip_next+0x54c/0x1c60 [nouveau] SS:ESP 0068:eddabd44 [ 199.321010] CR2: 00000000a8916100 [ 360.454032] INFO: task kworker/1:1:343 blocked for more than 120 seconds. [ 360.454103] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 360.454172] kworker/1:1 D ea0a7180 0 343 2 0x00000000 [ 360.454232] ea2b1edc 00000046 c15919c0 ea0a7180 c15919c0 c104e36a c15919c0 00000000 [ 360.454373] ea2b1f08 ea2ac400 eaf459c0 4e575a10 00000002 00000000 00000400 00989680 [ 360.454515] c15919c0 00989680 ea2ac434 00000030 4e575a10 00000002 eaf459c0 eaf41c40 [ 360.454660] Call Trace: [ 360.454700] [<c104e36a>] ? load_balance+0x53/0x4db [ 360.454742] [<c101e7f6>] ? default_spin_lock_flags+0x8/0xe [ 360.454786] [<c13739fe>] schedule+0x4e/0x50 [ 360.454819] [<c1372e2e>] __mutex_lock_common.isra.6+0x12b/0x145 [ 360.454873] [<c1372ebb>] __mutex_lock_slowpath+0x12/0x14 [ 360.454922] [<c1372c72>] mutex_lock+0x1d/0x2a [ 360.454965] [<f00aee14>] ? drm_format_num_planes+0x87/0x1ac [drm_kms_helper] [ 360.455030] [<f00aee3f>] drm_format_num_planes+0xb2/0x1ac [drm_kms_helper] [ 360.455082] [<c103233b>] ? add_timer+0x17/0x19 [ 360.455117] [<c1063b7b>] ? do_raw_spin_lock+0x8/0xb [ 360.455162] [<c103ab31>] process_one_work+0x10a/0x238 [ 360.455202] [<f00aee14>] ? drm_format_num_planes+0x87/0x1ac [drm_kms_helper] [ 360.457773] [<c103ae77>] worker_thread+0xbb/0x150 [ 360.460361] [<c103adbc>] ? rescuer_thread+0x137/0x137 [ 360.462918] [<c103e2eb>] kthread+0x6c/0x71 [ 360.465485] [<c103e27f>] ? flush_kthread_worker+0x79/0x79 [ 360.467984] [<c13757be>] kernel_thread_helper+0x6/0x10 [ 360.470453] INFO: task Xorg:5211 blocked for more than 120 seconds. [ 360.472846] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 360.475219] Xorg D c107d0ef 0 5211 4613 0x00400004 [ 360.477571] eddab9a0 00203082 eddab944 c107d0ef c15919c0 00000000 c15919c0 00000000 [ 360.479945] c102cd61 e974ee80 c1018122 ee250648 e974ee80 eddab9a8 c1374d4d ee250648 [ 360.482344] e974ee80 e974ee80 e974ee80 00000002 eddab9a8 00000000 e974007b ee63007b [ 360.484737] Call Trace: [ 360.486975] [<c107d0ef>] ? rcu_irq_exit+0x66/0x6b [ 360.489235] [<c102cd61>] ? irq_exit+0x85/0x87 [ 360.491466] [<c1018122>] ? smp_apic_timer_interrupt+0x63/0x71 [ 360.493725] [<c1374d4d>] ? apic_timer_interrupt+0x31/0x38 [ 360.495964] [<c13739fe>] schedule+0x4e/0x50 [ 360.498193] [<c1372e2e>] __mutex_lock_common.isra.6+0x12b/0x145 [ 360.500416] [<c1372ebb>] __mutex_lock_slowpath+0x12/0x14 [ 360.502611] [<c1372c72>] mutex_lock+0x1d/0x2a [ 360.504790] [<f00ad4f3>] drm_fb_helper_pan_display+0x2b/0x9a [drm_kms_helper] [ 360.507010] [<c11dbbaf>] fb_pan_display+0xe2/0x11d [ 360.509198] [<c11e7b35>] bit_update_start+0x1a/0x36 [ 360.511383] [<c11e5caf>] fbcon_switch+0x3a1/0x418 [ 360.513561] [<c122b1e8>] redraw_screen+0xc4/0x155 [ 360.515722] [<c11e6f7f>] fbcon_blank+0x1cb/0x216 [ 360.517865] [<c101e7f6>] ? default_spin_lock_flags+0x8/0xe [ 360.520039] [<c13740b8>] ? _raw_spin_unlock_irqrestore+0x17/0x1a [ 360.522195] [<c13740b8>] ? _raw_spin_unlock_irqrestore+0x17/0x1a [ 360.524334] [<c1028281>] ? console_unlock+0x1ac/0x1b4 [ 360.526485] [<c1028696>] ? vprintk+0x323/0x354 [ 360.528623] [<c122c704>] do_unblank_screen+0xd4/0x139 [ 360.530755] [<c122c778>] unblank_screen+0xf/0x11 [ 360.532886] [<c11b941f>] bust_spinlocks+0x13/0x28 [ 360.535043] [<c10053f4>] oops_end+0x15/0x85 [ 360.537170] [<c136ed2a>] no_context+0x15b/0x165 [ 360.539293] [<c136ee2f>] __bad_area_nosemaphore+0xfb/0x105 [ 360.541435] [<c136eff5>] bad_area+0x3a/0x40 [ 360.543585] [<c101efaa>] do_page_fault+0x1a2/0x318 [ 360.545727] [<c104e36a>] ? load_balance+0x53/0x4db [ 360.547880] [<c101ee08>] ? vmalloc_sync_all+0x98/0x98 [ 360.549961] [<c1374f7b>] error_code+0x67/0x6c [ 360.551983] [<f01adde9>] ? nv50_display_flip_next+0x54c/0x1c60 [nouveau] [ 360.553969] [<f01af547>] nvd0_display_flip_stop+0x31/0x294 [nouveau] [ 360.555938] [<f01afb80>] nvd0_display_flip_next+0x3d6/0x970 [nouveau] [ 360.557904] [<f00afe3f>] drm_crtc_helper_set_config+0x68e/0x847 [drm_kms_helper] [ 360.559874] [<c11b6d07>] ? vsnprintf+0x20f/0x266 [ 360.561809] [<f00887f2>] drm_mode_setcrtc+0x29d/0x2d6 [drm] [ 360.563755] [<f0088555>] ? drm_mode_setplane+0x27a/0x27a [drm] [ 360.565678] [<f007df2a>] drm_ioctl+0x270/0x32f [drm] [ 360.567603] [<f0088555>] ? drm_mode_setplane+0x27a/0x27a [drm] [ 360.569506] [<c1059149>] ? timekeeping_get_ns+0x10/0x47 [ 360.571416] [<f007dcba>] ? drm_getsarea+0x112/0x112 [drm] [ 360.573324] [<c10d528c>] vfs_ioctl+0x20/0x2a [ 360.575226] [<c10d5c40>] do_vfs_ioctl+0x404/0x442 [ 360.577124] [<c105e660>] ? clockevents_program_event+0xee/0x10b [ 360.579036] [<c105f4db>] ? tick_program_event+0x24/0x29 [ 360.580939] [<c1041a30>] ? hrtimer_interrupt+0x11d/0x1ac [ 360.582852] [<c10ca5e3>] ? fput+0x18/0x164 [ 360.584729] [<c10d5cbc>] sys_ioctl+0x3e/0x62 [ 360.586599] [<c137436c>] syscall_call+0x7/0xb
