Hello, Thanks,
but what about the libGLU and libGL libraries? don't you need those. At the moment I have the Utah ones is that enough. Gordon. * Seth Arnold ([EMAIL PROTECTED]) wrote: > Gordon, you are in luck, this was my situation exactly. > > Go to matrox.com, find their drivers section, and download their linux > driver. It should be one file. Be sure to take a look at their readme, > it is good enough to get you installed. (except for the bit about groups > and DRI.... don't bother with setting a group for DRI.) > > You will need a recent kernel. I use 2.4.0-test7. I built my kernel with > agpgart and mga modules available. They may or may not be needed. I'd bet > agpgart is required, mga isn't. <shrug> > > There are two ways of getting Matrox's mga_drv.o into use -- replace > XFree86's version in /usr/X11R6/lib/modules/drivers/ with matrox's > (clunky, will get overwritten with each new xf86 upgrade unless you use > dpkg diversions...) -or- (the recommended way) is to use a direct path > in your /etc/X11/XF86Config-4 file to load the new module. I haven't > gone this route (lazy) but suggest you do. Sadly, I don't know the > syntax for this, so I suggest you look for all of Branden's postings in > the archives for more information about this. (Perhaps he mentioned it > in a thread with someone from nvidia...) > > Once things are in place, modprobe agpgart, modprobe mga, and startx. > > I have attached my XF86Config file for reference... > > * Gordon Heydon <[EMAIL PROTECTED]> [001013 00:14]: > > Hello, > > > > This is a simple question, can anyone tell me how to or better point me > > in the direction of some documentation on how to get hardware 3gl going > > with my dual head g400 (I am only using 1 head at the moment) with the > > Xfree 4.0.1 debs found here. > > > > Thanks in advance > > > > Gordon. > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > Section "ServerLayout" > Identifier "Dual" > Screen "Screen0" RightOf "Screen1" > Screen "Screen1" > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > Option "Xinerama" > EndSection > > Section "ServerLayout" > Identifier "Single" > Screen "Screen0" > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > FontPath "/usr/X11R6/lib/X11/fonts/freefont/" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/PEX/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:noscale" > FontPath "/usr/X11R6/lib/X11/fonts/misc/:noscale" > EndSection > > Section "Module" > Load "GLcore" > Load "dbe" > Load "dri" > Load "extmod" > Load "glx" > Load "pex5" > Load "record" > Load "xie" > Load "freetype" > Load "type1" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "keyboard" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/mouse" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Monitor" > Identifier "Mitsubishi" > VendorName "MEL" > ModelName "42c0" > HorizSync 30.0 - 105.0 > VertRefresh 70.0 - 152.0 > Option "DPMS" > #ModeLine "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync > -VSync > EndSection > > Section "Monitor" > Identifier "Sony" > HorizSync 60.5 - 82.0 > VertRefresh 65.0 - 100.0 > Option "DPMS" > EndSection > > Section "Device" > Identifier "G400_0" > Driver "mga" > VendorName "Matrox" > BoardName "MGA G400 AGP" > BusID "PCI:1:0:0" > Screen 0 > EndSection > > Section "Device" > Identifier "G400_1" > Driver "mga" > VendorName "Matrox" > BoardName "MGA G400 AGP" > BusID "PCI:1:0:0" > Screen 1 > EndSection > > Section "Screen" > Identifier "Screen0" > Device "G400_0" > Monitor "Mitsubishi" > DefaultDepth 16 > SubSection "Display" > Depth 1 > Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > Section "Screen" > Identifier "Screen1" > Device "G400_1" > Monitor "Sony" > DefaultDepth 16 > SubSection "Display" > Depth 1 > Modes "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > Section "DRI" > Mode 0666 > EndSection >
