Package: xserver-xorg Version: 6.8.2.dfsg.1-6 Upgrading from XFree86 to Xorg broke my dual head xinerama setup. This same setup worked perfectly well with XFree86 4.3
lspci: 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Radeon 7000/Radeon VE Flags: bus master, stepping, 66MHz, medium devsel, latency 64 Memory at c0000000 (32-bit, prefetchable) [size=128M] I/O ports at b800 [size=256] Memory at cfef0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at bfc00000 [disabled] [size=128K] Capabilities: <available only to root> The following is the relevant info from Xorg.0.log: ... (II) RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3 (II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2 (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DDC:ddc2" removed. (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DDC:ddc2" removed. (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DDC:ddc2" removed. (II) RADEON(0): DDC Type: 2, Detected Type: 0 (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DDC:ddc2" removed. (II) RADEON(0): DDC Type: 3, Detected Type: 1 (II) RADEON(0): EDID data from the display on port 2----------------------- (II) RADEON(0): Manufacturer: BNQ Model: 7659 Serial#: 3770 (II) RADEON(0): Year: 2004 Week: 32 (II) RADEON(0): EDID Version: 1.3 (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) RADEON(0): Sync: Separate Composite (II) RADEON(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27 (II) RADEON(0): Gamma: 2.20 (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display ... (--) Chipset ATI Radeon VE/7000 QY (AGP/PCI) found (--) Chipset ATI Radeon VE/7000 QY (AGP/PCI) found ... (II) Loading sub module "radeon" (II) LoadModule: "radeon" (II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o (II) Loading sub module "radeon" (II) LoadModule: "radeon" (II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o ... (II) RADEON(0): Monitor name: BenQ FP731 (II) RADEON(0): (II) RADEON(0): Primary: Monitor -- CRT Connector -- VGA DAC Type -- Primary TMDS Type -- NONE DDC Type -- VGA_DDC (II) RADEON(0): Secondary: Monitor -- NONE Connector -- DVI-I DAC Type -- TVDAC/ExtDAC TMDS Type -- Internal DDC Type -- DVI_DDC ... (WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled ... (WW) RADEON(1): Only one monitor detected, Second screen will NOT be created ... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]