Your message dated Tue, 18 Sep 2007 18:30:44 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Bug#442909: xorg upgrade i810->intel driver broke 1600x1200
resolution on Intel 865G chipset
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: xorg
Version: 7.2-5
Distribution: Debian Lenny (testing)
Kernel: 2.6.22.6
Intel Driver:
ii xserver-xorg-video-intel 2:2.1.0-2
After running apt-get dist-upgrade and switching my xorg.conf to use "intel"
instead of i810 (which no longer exists) I no longer can run at 1600x1200.
I have tried the 915 resolution 'hack' but to no avail.
My xorg.conf is shown below and my Xorg.0 log is attached and bzip2d.
Any help would be appreciated as the highest resolution I can achieve is
now only 1280x1024.
It appears the i810 driver is now obsolete and no longer supported so
reverting back is also not an option.
Thanks,
Justin.
xorg.conf::
----------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Generic Video Card"
Driver "intel"
VendorName "Intel Corporation"
BoardName "82865G Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
#DisplaySize 360 270 # mm
Identifier "Generic Monitor"
VendorName "HWP"
ModelName "hp 9500"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 96.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
--- End Message ---
--- Begin Message ---
Justin Piszcz wrote:
>
>
> On Mon, 17 Sep 2007, Justin Piszcz wrote:
>
>>
>>
>> On Mon, 17 Sep 2007, Julien Cristau wrote:
>>
>>> On Mon, Sep 17, 2007 at 16:12:46 -0400, Justin Piszcz wrote:
>>>
>>>> (II) intel(0): Printing probed modes for output VGA
>>>> (II) intel(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504
>>>> 1728 1024 1027 1028 1072 +hsync +vsync (91.1 kHz)
>>>> (II) intel(0): Modeline "1600x1200"x75.0 204.75 1600 1720 1888
>>>> 2176 1200 1203 1207 1255 -hsync +vsync (94.1 kHz)
>>>> (II) intel(0): Modeline "1280x1024"x84.8 159.50 1280 1376 1512
>>>> 1744 1024 1027 1034 1078 -hsync +vsync (91.5 kHz)
>>>> (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
>>>> 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>>>> (II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200
>>>> 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
>>>> (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136
>>>> 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
>>>> (II) intel(0): Modeline "800x600"x84.9 56.75 800 848 928 1056
>>>> 600 603 607 633 -hsync +vsync (53.7 kHz)
>>>> (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
>>>> 600 601 604 625 +hsync +vsync (46.9 kHz)
>>>> (II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816
>>>> 480 483 487 507 -hsync +vsync (42.9 kHz)
>>>> (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800
>>>> 480 490 492 525 -hsync -vsync (31.5 kHz)
>>>> (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900
>>>> 400 412 414 449 -hsync +vsync (31.5 kHz)
>>>
>>> This looks better. Can you add a 'Virtual 1600 1600' line to the
>>> Display subsection of your Screen section, and then after X is up run
>>> "xrandr --output VGA --mode 1600x1200"?
>>>
>>> Cheers,
>>> Julien
>>>
>>
>> I can test that tomorrow, not local anymore.
>>
>> Section "Screen"
>> Identifier "Default Screen"
>> Device "Generic Video Card"
>> Monitor "Generic Monitor"
>> DefaultDepth 24
>>
>> SubSection "Display"
>> Depth 24
>> Modes "1600x1200"
>> Virtual 1600 1600
>> EndSubSection
>> EndSection
>>
>> Will let you know tomorrow, thanks!
>>
>> Justin.
>>
>
> Yes this works
Closing this bug then.
The official ocumentation about all this is basically in man xorg.conf.
but, there also seem to be lots of blog entries about all this :)
Brice
--- End Message ---