Alex Deucher wrote:
> This is probably due to a change in default xrandr mode selection
> policy in the two xserver versions you are using.
>
>
> > (However fluxbox still thinks the desktop is 1600x1200, for example when
> > maximizing windows, but I suspect this is a fluxbox bug?)
> >
>
> Since you are using a clone mode, fluxbox is getting it's geometry
> from the 1600x1200 screen.
Well, it's not exatcly clone mode if the second screen is set up
using "xrandr --output VGA-0 --auto --right-of DVI-0"? :)
First I tried disabling the bogus connector using 'Option
"monitor-DVI-0" "bogus"' and 'Option "Ignore" "true"' in the
corresponding Monitor section, but that didn't work (X would refuse
to start with 'no usable screens').
Right now I'm using 'Option "DefaultConnectorTable" "yes"',
which works for me as far as the connectors are concerned.
However the default resolution of the secondary Monitor is now
1280x1024 instead of 1600x1200. So I still have to run xrandr in my
.xsession to change to native panel resolution even though I'm
saying 'Option "PreferredMode" "1600x1200"' in the xorg.conf:
IMHO randr should use the native resolution for both monitors by
default.
Also, the "ConnectorTable" option seems to be undocumented?
At least it's not mention in the radeon(4) manpage (however it does
mention the "DefaultConnectorTable" option).
|Section "ServerLayout"
| Identifier "X.org Configured"
| Screen 0 "Screen0" 0 0
| InputDevice "Mouse0" "CorePointer"
| InputDevice "Keyboard0" "CoreKeyboard"
|EndSection
|
|Section "Files"
| RgbPath "/etc/X11/rgb"
| ModulePath "/usr/lib/xorg/modules"
| FontPath "/usr/share/fonts/X11/misc"
| FontPath "/usr/share/fonts/X11/cyrillic"
| FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
| FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
| FontPath "/usr/share/fonts/X11/Type1"
| FontPath "/usr/share/fonts/X11/100dpi"
| FontPath "/usr/share/fonts/X11/75dpi"
| FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
|EndSection
|
|Section "Module"
| Load "xtrap"
| Load "extmod"
| Load "glx"
| Load "record"
| Load "dri"
| Load "dbe"
| Load "GLcore"
|EndSection
|
|Section "InputDevice"
| Identifier "Keyboard0"
| Driver "kbd"
|EndSection
|
|Section "InputDevice"
| Identifier "Mouse0"
| Driver "mouse"
| Option "Protocol" "auto"
| Option "Device" "/dev/input/mice"
| Option "ZAxisMapping" "4 5 6 7"
|EndSection
|
|Section "Monitor"
| #DisplaySize 410 310 # mm
| Identifier "syncmaster"
| Option "PreferredMode" "1680x1050"
| Option "Position" "0 0"
| Option "DPMS"
|EndSection
|
|Section "Monitor"
| Identifier "flatron"
| Option "PreferredMode" "1600x1200"
| Option "Position" "1680 0"
| Option "DPMS"
|EndSection
|
|Section "Monitor"
| Identifier "bogus"
| Option "Enable" "false"
|EndSection
|
|
|Section "Device"
| ### Available Driver options are:-
| ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
| ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
| ### [arg]: arg optional
| #Option "NoAccel" # [<bool>]
| #Option "SWcursor" # [<bool>]
| #Option "Dac6Bit" # [<bool>]
| #Option "Dac8Bit" # [<bool>]
| #Option "BusType" # [<str>]
| #Option "CPPIOMode" # [<bool>]
| #Option "CPusecTimeout" # <i>
| #Option "AGPMode" # <i>
| #Option "AGPFastWrite" # [<bool>]
| #Option "AGPSize" # <i>
| #Option "GARTSize" # <i>
| #Option "RingSize" # <i>
| #Option "BufferSize" # <i>
| #Option "EnableDepthMoves" # [<bool>]
| #Option "EnablePageFlip" # [<bool>]
| #Option "NoBackBuffer" # [<bool>]
| #Option "DMAForXv" # [<bool>]
| #Option "FBTexPercent" # <i>
| #Option "DepthBits" # <i>
| #Option "PCIAPERSize" # <i>
| #Option "AccelDFS" # [<bool>]
| #Option "DDCMode" # [<bool>]
| #Option "IgnoreEDID" # [<bool>]
| #Option "DisplayPriority" # [<str>]
| #Option "PanelSize" # [<str>]
| #Option "ForceMinDotClock" # <freq>
| #Option "ColorTiling" # [<bool>]
| #Option "VideoKey" # <i>
| #Option "RageTheatreCrystal" # <i>
| #Option "RageTheatreTunerPort" # <i>
| #Option "RageTheatreCompositePort" # <i>
| #Option "RageTheatreSVideoPort" # <i>
| #Option "TunerType" # <i>
| #Option "RageTheatreMicrocPath" # <str>
| #Option "RageTheatreMicrocType" # <str>
| #Option "ScalerWidth" # <i>
| #Option "RenderAccel" # [<bool>]
| #Option "SubPixelOrder" # [<str>]
| #Option "ShowCache" # [<bool>]
| #Option "DynamicClocks" # [<bool>]
| #Option "VGAAccess" # [<bool>]
| #Option "ReverseDDC" # [<bool>]
| #Option "LVDSProbePLL" # [<bool>]
| #Option "AccelMethod" # <str>
| #Option "DRI" # [<bool>]
| #Option "ConnectorTable" # <str>
| #Option "DefaultConnectorTable" # [<bool>]
| Option "DefaultConnectorTable" "yes"
| #Option "DefaultTMDSPLL" # [<bool>]
| #Option "DefaultTMDSPLL" # [<bool>]
| #Option "TVDACLoadDetect" # [<bool>]
| #Option "ForceTVOut" # [<bool>]
| #Option "TVStandard" # <str>
| #Option "IgnoreLidStatus" # [<bool>]
| #Option "DefaultTVDACAdj" # [<bool>]
| #Option "Int10" # [<bool>]
| Identifier "Card0"
| Driver "radeon"
| VendorName "ATI Technologies Inc"
| BoardName "RV370 5B60 [Radeon X300 (PCIE)]"
|# BusID "PCI:2:0:0"
| Option "monitor-VGA-0" "flatron"
| Option "monitor-DVI-0" "syncmaster"
|EndSection
|
|Section "Screen"
| Identifier "Screen0"
| Device "Card0"
| Monitor "syncmaster"
| SubSection "Display"
| Depth 24
| Virtual 3328 2048
| EndSubSection
|EndSection
> > As you can see, two DVI-ports are detected even though only one is
> > really present on the card.
> >
> > The SyncMaster is connected to the DVI port and the Flatron is connected
> > to the VGA port. The S-Video port is present, but unused.
>
> Please send me your video bios and the pci subsystem ids for your
> video card, and I'll fix this issue.
>
> subsystem ids:
> lspci -nv
02:00.0 0300: 1002:5b60
Subsystem: 17af:201e
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at e8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 8c00 [size=256]
Memory at fdef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fdec0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
02:00.1 0380: 1002:5b70
Subsystem: 17af:201f
Flags: bus master, fast devsel, latency 0
Memory at fdee0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint, MSI 00
> video bios (as root), use lspci to get the pci slot id:
> cd /sys/bus/pci/devices/<pci slot id>/
> echo 1 > rom
> cat rom > /tmp/videocard.rom
> echo 0 > rom
http://uguu.de/~ranma/radeon-x300.rom.gz
HTH,
--
Tobias PGP: http://9ac7e0bc.uguu.de
このメールは十割再利用されたビットで作られています。
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
