Thanks a lot for your tip. So it works only with 1 and 2 agp mode. > On Sun, Feb 15, 2009 at 4:49 PM, Miloslav Semler <maj...@tiscali.cz> wrote: >> Package: xserver-xorg-video-radeon >> Version: 1:6.9.0-1+lenny4 >> Severity: important >> >> Hello, >> I have an problem with driver xserver-xorg-video-radeon. If I start >> x.org with this driver, it consumes 95+% cpu and do nothing. Instead of >> continuing in boot, it hangs and shut down monitor to DMPS. I tested >> older kernel, which worked ok, but now it does same. The problem was >> occured when I upgraded from sarge to lenny. Xserver is binary >> distribution, drivers and kernel too. I also tested default x.org >> configuration, but there was same results. Now I must use >> framebuffer. It works, but performace is very poor. >> > > Sounds like an AGP problem. Try setting another AGP mode. Add the > following option to the device section of your config: > Option "AGPMode" "X" > where X = 1 or 2 or 4 or 8. > When you find an AGP mode that works, let me know and I'll add a quirk > to the driver. > > Alex
-- To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org