> > The new 'radeon' driver correctly detects 2x. It doesn't seem to > > freeze. > > > > However, full-screen 640x480 mode is now a small display centered in > > the full 1024x768 screen. Before it really switched resolution to > > cover the full screen. > > The scaling should default to full rather then center. Can attach the > output of xrandr --verbose?
Here it is. -- Sylvain
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1024 x 1024 VGA-0 disconnected (normal left inverted right x axis y axis) Identifier: 0x5c Timestamp: 144086 Subpixel: no subpixels Clones: DVI-0 CRTCs: 0 1 load_detection: 1 (0x00000001) range: (0,1) DVI-0 disconnected (normal left inverted right x axis y axis) Identifier: 0x5d Timestamp: 144086 Subpixel: horizontal rgb Clones: VGA-0 CRTCs: 0 1 scaler: off LVDS connected 1024x768+0+0 (0x60) normal (normal left inverted right x axis y axis) 0mm x 0mm Identifier: 0x5e Timestamp: 144086 Subpixel: horizontal rgb Clones: CRTC: 0 CRTCs: 0 scaler: full 1024x768 (0x60) 65.0MHz *current +preferred h: width 1024 start 1040 end 1176 total 1344 skew 0 clock 48.4KHz v: height 768 start 770 end 771 total 806 clock 60.0Hz 1024x768 (0x61) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz S-video disconnected (normal left inverted right x axis y axis) Identifier: 0x5f Timestamp: 144086 Subpixel: no subpixels Clones: CRTCs: 0 1 tv_standard: ntsc tv_vertical_position: 0 (0x00000000) range: (-5,5) tv_horizontal_position: 0 (0x00000000) range: (-5,5) tv_horizontal_size: 0 (0x00000000) range: (-5,5)