Voilà, j'utilise xcdroast et tout à l'air bien configuré, sauf que ca ne
grave pas, ca se plante après 2 ou 3 %.
J'ai un lecteur plextor scsi et un graveur yamaha scsi aussi, et j'essaye de
graver à la volée. (ca devrait etre faisable non ?).
Je vous ai mis la sortie de xcdroast. J'imagine que les infos les plus
importantes dans mon problèmes se trouvent à la fin.
Merci .
---------------
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,5,0" fs=8192k
-v -useinfo speed=10 -dao -dummy -eject -pad tsize=333006s -data -
scsidev: '0,5,0'
scsibus: 0 target: 5 lun: 0
Linux sg driver version: 3.1.20
pregap1: -1
Cdrecord 1.10 (i586-mandrake-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.5'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC
Vendor_info : 'YAMAHA '
Identifikation : 'CRW2100S '
Revision : '1.0H'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 7582848 = 7405 KB
FIFO size : 8388608 = 8192 KB
Track 01: data 650 MB padsize: 30 KB
Total size: 746 MB (74:00.28) = 333021 sectors
Lout start: 747 MB (74:02/21) = 333021 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11316 (97:31/09)
ATIP start of lead out: 335100 (74:30/00)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 335100 Blocks current: 335100 Blocks remaining: 2079
Starting to write CD/DVD at speed 8 in dummy mode for single session.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 2D 2B 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 0A 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x0A (write error - padding blocks added) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.129s timeout 200s
Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 0A 00 00 00 00
write track data: error after 23681024 bytes
Writing time: 51.390s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.001s
cdrecord: fifo had 501 puts and 374 gets.
cdrecord: fifo was 0 times empty and 264 times full, min fill was 91%.
--
Fabien Jacques
Product champion aka red71 for swccg@decipher
www.decipher.com
+32-495/99.53.55
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";
